Summary Treatment Report: Redevelopment

Catchments and Associated BMP Types

ID Catchment Name Catchment BMP Routing Destination
1 Subdivision Wet Detention Routed to Outlet

Volume of Runoff Summary

Scenario Catchment Area (acres) Runoff Volume (ac-ft/yr) Runoff Volume (in/year)
Pre-Condition 10.00 1.35 1.62
System Post-Condition (with BMPs) 10.00 10.92 13.10
Post-Condition (no BMP) 10.00 10.92 13.10
Runoff volumes are shown in acre-feet per year and converted to depth (inches/year) by dividing by area and multiplying by 12.
The catchment area is the same in both post rows: BMPs do not change the area, only how much runoff leaves it. Post-Condition (no BMP) is all the runoff the post-development catchments produce; System Post-Condition (with BMPs) is the runoff that leaves the system at the outlet. BMPs that keep water out of the surface discharge (retention, exfiltration, harvesting and the like) make the with-BMP volume smaller; BMPs that discharge to surface water (wet detention, surface discharge filtration) remove nutrient load but not volume, so the two volumes can be equal.

Summary of Removals

Summary Loading:
Specified (for Redevelopment) TN = 45.00%; TP = 80.00%
Provided TN = 41.92%; TP = 74.02%

% Specified Removal:
Is specified removal for total nitrogen removal met?
No
Is specified removal for total phosphorus removal met?
No
Results are compared against the analysis type targets. Percentages are shown to two decimals.
No Pre/Post Analysis
Analysis Type: Redevelopment
There are no pre/post targets for this analysis type.
Nitrogen & Phosphorus Loading
Surface water and groundwater loading summary
Nitrogen (N)
Total N pre load5.04 kg/yr
Total N post load23.82 kg/yr
Percent N load reduction41.92 %
Provided N discharge load13.84 kg/yr (30.51 lb/yr)
Provided N load removed (surface)9.99 kg/yr (22.02 lb/yr)
Phosphorus (P)
Total P pre load0.987 kg/yr
Total P post load4.402 kg/yr
Percent P load reduction74.02 %
Provided P discharge load1.144 kg/yr (2.522 lb/yr)
Provided P load removed (surface)3.258 kg/yr (7.184 lb/yr)
Values are project totals. Surface units = kg/yr; groundwater recharge in MG/yr and concentrations in mg/L. Values formatted to appropriate precision.