Filtration Input Variables

Treatment Depth (in)0.50
Hydraulic Capture Efficiency (%)71.50
Type of Media MixB&G CTS12
Media N Reduction (%)60.00
Media P Reduction (%)90.00

Watershed Characteristics

Watershed Area (acres)5.00
Contributing Area to BMP (ac)5.00
Watershed Non-DCIA Curve Number (0-100)75
Watershed DCIA Percent (%)25.00
Rainfall ZoneFlorida Zone 2
Rainfall (in)50.00

Surface Water Discharge

Provided Nitrogen Treatment Efficiency (%)42.9
Provided Phosphorus Treatment Efficiency (%)64.4


Media Mix Information
Parameter Value
Type of Media Mix B&G CTS12
Media N Reduction (%) 60
Media P Reduction (%) 90

Note: Media Layer Depth not entered. B&G CTS12 needs at least 12 in (design guidance from the media suppliers; see the Media Mix help page). Enter the depth in Enter Media Mix Information to check it.



Filtered Water (Stand-Alone)
Parameter Value
Volume Filtered (MG/yr) 1.272
TN Load in the Filtered Water (kg/yr) 3.407
TN Concentration in the Filtered Water (mg/L) 0.708
TP Load in the Filtered Water (kg/yr) 0.157
TP Concentration in the Filtered Water (mg/L) 0.033

The filtered water is discharged to the surface. The runoff the filter does not capture bypasses it untreated; the Surface Water Discharge table above shows the total leaving the BMP.



Surface Discharge Load Diagram for Surface Discharge Filtration (stand-alone)

Runoff input is only from this catchment, no routing is performed here

Load
N: 11.91 kg/yr
P: 2.20 kg/yr
Q: 5.46 ac-ft/yr
→
Treatment
N: 43 %
P: 64 %
→
Surface Discharge
N: 6.80 kg/yr
P: 0.78 kg/yr
Q: 1.56 ac-ft/yr
↓
Mass Reduction
N: 5.11 kg/yr
P: 1.42 kg/yr