Filtration Input Variables

Treatment Depth (in)1.00
Hydraulic Capture Efficiency (%)71.10
Type of Media MixB&G CTS24
Media N Reduction (%)75.00
Media P Reduction (%)95.00

Watershed Characteristics

Watershed Area (acres)3.00
Contributing Area to BMP (ac)3.00
Watershed Non-DCIA Curve Number (0-100)80
Watershed DCIA Percent (%)70.00
Rainfall ZoneFlorida Zone 3
Rainfall (in)54.00

Surface Water Discharge

Provided Nitrogen Treatment Efficiency (%)53.3
Provided Phosphorus Treatment Efficiency (%)67.5


Media Mix Information
Parameter Value
Type of Media Mix B&G CTS24
Media N Reduction (%) 75
Media P Reduction (%) 95

Note: Media Layer Depth not entered. B&G CTS24 needs at least 24 in (design guidance from the media suppliers; see the Media Mix help page). Enter the depth in Enter Media Mix Information to check it.



Filtered Water (Stand-Alone)
Parameter Value
Volume Filtered (MG/yr) 1.864
TN Load in the Filtered Water (kg/yr) 4.232
TN Concentration in the Filtered Water (mg/L) 0.600
TP Load in the Filtered Water (kg/yr) 0.122
TP Concentration in the Filtered Water (mg/L) 0.017

The filtered water is discharged to the surface. The runoff the filter does not capture bypasses it untreated; the Surface Water Discharge table above shows the total leaving the BMP.



Surface Discharge Load Diagram for Surface Discharge Filtration (stand-alone)

Runoff input is only from this catchment, no routing is performed here

Load
N: 23.81 kg/yr
P: 3.42 kg/yr
Q: 8.05 ac-ft/yr
→
Treatment
N: 53 %
P: 68 %
→
Surface Discharge
N: 11.11 kg/yr
P: 1.11 kg/yr
Q: 2.33 ac-ft/yr
↓
Mass Reduction
N: 12.70 kg/yr
P: 2.31 kg/yr