Multiple BMP in Series — Equations
System case
Case type: Wet Detention to Stormwater Harvesting. Calculation used: Wet Detention to Stormwater Harvesting.
Wet detention [BMP 1 (Wet Detention)] → Treatment train (stormwater harvesting) [BMP 2 (Stormwater Harvesting)]
| Segment | BMPs | How it is calculated |
| Wet detention | BMP 1 (Wet Detention) | Its own removal |
| Treatment train (stormwater harvesting) | BMP 2 (Stormwater Harvesting) | Added to the removal so far: E = E1 + E2(1 - E1/100); its removal also sets the hydraulic capture |
Equations
Treatment train: E (%) = E1 + E2 x (1 - E1 / 100)
Applied to each BMP in turn
Hydraulic Capture (%) = the last harvesting / downstream BMP's N removal
Notes
- The Multiple BMP detects its scenario from the BMPs in the series and uses the calculation named above.
- The steps table lists every calculation in the order it was made, with the values used.
- Each BMP's section shows its own equations and its values as they stand after the series calculation.
Values
| Variable | Current value |
| Scenario | Wet Detention to Stormwater Harvesting |
| Calculation used | Wet Detention to Stormwater Harvesting |
| Runoff into the series | 18.046 ac-ft/yr |
| N load into the series | 27.813 kg/yr |
| P load into the series | 3.849 kg/yr |
| Hydraulic Capture | 52.7 % |
| N removal (Multiple BMP) | 74.5 % |
| P removal (Multiple BMP) | 86.5 % |
| N load out (surface discharge) | 7.079 kg/yr |
| P load out (surface discharge) | 0.519 kg/yr |
Calculation steps (values as used)
| # | Step | Calculation (values used) | Result |
| 1 | Inflow to the series | catchment runoff and loads | Q 18.046 ac-ft/yr, N 27.813 kg/yr, P 3.849 kg/yr |
| 2 | Combine BMP 1 and BMP 2 | N: 46.204 + 52.691 x (1 - 46.204/100); P: 71.485 + 52.691 x (1 - 71.485/100) | N 74.55 %, P 86.51 % |
| 3 | Hydraulic Capture | = BMP 2 (harvesting) N removal | 52.69 % |
BMP 1: Wet Detention with Floating Wetland Mats
Its N and P removal below is combined with the rest of the series as shown in the steps above.
Equations
Residence Time rt (days) = Permanent Pool Volume (ac-ft) / Annual Runoff Volume (ac-ft) x 365
N removal (%) = 43.75 x rt / (4.38 + rt)
P removal (%) = 40.13 + 6.372 x ln(rt) + 0.213 x [ln(rt)]^2
No littoral zone: N removal = N removal x 0.90, P removal = P removal x 0.90
Wetland credit: N removal = N removal + Wetland Efficiency Credit x (100 - N removal) / 100
P removal = P removal + Wetland Efficiency Credit x (100 - P removal) / 100
Notes
- Residence Time is capped at 200 days unless ART > 200 is allowed.
- The littoral-zone reduction is applied before the wetland credit.
- N and P removal cannot exceed 100%.
Values
| Variable | Current value |
| Wetland Efficiency Credit | 10.00 % |
| Permanent Pool Volume | 2.47 ac-ft |
| Annual Runoff Volume | 18.05 ac-ft |
| Treatment Rate | (no media mix) |
| N removal | 46.2 % |
| P removal | 71.5 % |
BMP 2: Stormwater Harvesting
Its N and P removal below is combined with the rest of the series as shown in the steps above.
Equations
x = Harvest Volume (ac-ft) x 12 / (Watershed Area (ac) x ROC)
y = Harvest Rate (in/week) x Irrigation Area (ac) / 7 / (Watershed Area (ac) x ROC)
Harvest Efficiency (%) = REV table lookup of (x, y)
Water Use (MGY) = Harvest Rate (in/week) x 52 / 12 x Irrigation Area (ac) x 0.32585 MG/ac-ft
Harvested Water Supply (MGY) = Annual Runoff Volume (ac-ft/yr) x Harvest Efficiency / 100 x 0.32585 MG/ac-ft
Supplemental Water Needed (MGY) = Water Use - Harvested Water Supply (0 when the supply covers the use)
Notes
- ROC is the catchment's annual runoff coefficient.
- Harvest Efficiency is capped at 90%. Below 20%, the lowest REV curve, it is extended along the line between the 20% and 30% curves (beyond the published curves).
- N and P removal are equal to the Harvest Efficiency.
- Treatment Depth is back-calculated as the retention depth giving the same efficiency in the retention tables.
- Values: the harvest efficiency is read from the REV curves of the Rainfall Zone. Non-DCIA Curve Number, DCIA Percent and Treatment Rate are listed for every retention-type BMP but are not used to calculate the harvest efficiency. Non-DCIA Curve Number and DCIA Percent are used only to back-calculate the Treatment Depth.
Values
| Variable | Current value |
| Available Harvest Volume | 1.00 ac-ft |
| Total Area Available for Irrigation | 3.00 acres |
| Available Harvest Rate | 0.80 in/week |
| Contributing Area | 5.000 ac |
| Watershed Area | 5.000 ac |
| Non-DCIA Curve Number | 80 |
| DCIA Percent | 85 % |
| Rainfall Zone | Florida Zone 5 |
| Treatment Depth | 0.672 in |
| Hydraulic Capture | 52.7 % |
| Treatment Rate | (no media mix) |
| N removal | 52.7 % |
| P removal | 52.7 % |