Vegetated Natural Buffer — calculations

Vegetated natural buffer: detention + plants — Vegetated Natural Buffer on Road edge (stand-alone: this catchment's runoff only)
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

How this treatment's values are worked out: the equations, then the values they are worked with (v1's Equations button). A change on the Entry or Sizing tab shows here at once.

Equations

N removal (%) = Nitrogen buffer table (Slope of Buffer, Buffer Width)

P removal (%) = Phosphorus buffer table (Slope of Buffer, Buffer Width)

Hydraulic Capture (%) = 0 (no volume is retained)

Notes

Detention + Plants: the N and P removal are read from the buffer tables shown below, interpolated in slope and width.

Slopes from 6 to 20 % are not in the tables: the removal is extrapolated in a straight line through the 2 % and 6 % values (never below 0).

Outside that (slope 2-20 %, width 10-350 ft) the removal is 0.

The Treatment Depth is not used.

Values

VariableCurrent value
Buffer Width100.00 ft
Buffer Length500.00 ft
Buffer Depth0.50 ft
Width of Area Feeding Buffer130.00 ft
Water storage capacity of soil0.15 in/in
Slope of Buffer6.00 %
Contributing Area1.500 ac
Watershed Area1.500 ac
Non-DCIA Curve Number80
DCIA Percent50 %
Rainfall ZoneFlorida Zone 3
Treatment Depth0.391 in
Hydraulic Capture0.0 %
Treatment Rate(no media mix)
N removal * with vegetation only45.0 %
P removal * with vegetation only25.0 %

Nitrogen buffer table (removal %)

Slope (%) \ Width (ft)102550100350
25060657590
61015254560

Read at slope 6.00 % and width 100.00 ft (interpolated): N removal = 45.00 %.

Phosphorus buffer table (removal %)

Slope (%) \ Width (ft)102550100350
22540556065
6510152565

Read at slope 6.00 % and width 100.00 ft (interpolated): P removal = 25.00 %.