Routing 1

Example #4 with harvesting pond — Catchment Routing results
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

Calculated with v1's engine, by Strand routing (v1's routing; use this for permits), so an opened v1 project gives the numbers v1 gives. This is the summary; v1's reports for this routing (Summary, Complete, Flow Balance, Full Routing Diagram, compliance, catchments and their treatments) are in the Report list above.

Nitrogen

Total Outlet Nitrogen Loading5.89 kg/yr
Total Catchment Nitrogen Loading27.81 kg/yr
Provided Nitrogen Treatment Efficiency78.81 %

Phosphorus

Total Outlet Phosphorus Loading0.36 kg/yr
Total Catchment Phosphorus Loading3.85 kg/yr
Provided Phosphorus Treatment Efficiency90.77 %

Runoff and area

Pre-development runoff volume11.66 ac-ft/yr
Post-development runoff volume leaving the site8.54 ac-ft/yr
Pre-Condition Catchment Area5.50 ac
Post Condition Catchment Area5.00 ac

Requirement

Type of analysisNet Improvement
Nitrogen removal for post = pre35.4 %
Phosphorus removal for post = pre35.4 %
Nitrogen removal to meet (the greater)35.4 %
Phosphorus removal to meet (the greater)35.4 %

Meets the required removal? Nitrogen: yes (78.81 % provided, 35.4 % needed). Phosphorus: yes (90.77 % provided, 35.4 % needed). The removal needed is the greater of the type of analysis's percentage and the post = pre removal, as in v1's reports.

How each catchment is routed

CatchmentDrains toTreatment usedLeft out
catchment #1OutletBMPs in Series