Vegetated Filter Strip — calculations

Vegetated filter strip: detention with media — Vegetated Filter Strip on Highway (stand-alone: this catchment's runoff only)
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

How this treatment's values are worked out: the equations, then the values they are worked with (v1's Equations button). A change on the Entry or Sizing tab shows here at once.

Equations

Buffer N (%) = Nitrogen buffer table (Slope of VFS, VFS Width)

Buffer P (%) = Phosphorus buffer table (Slope of VFS, VFS Width)

N removal (%) = Buffer N + Media N Reduction x (100 - Buffer N) / 100

P removal (%) = Buffer P + Media P Reduction x (100 - Buffer P) / 100

Hydraulic Capture (%) = 0 (no volume is retained)

Notes

Detention: the N and P removal are read from the buffer tables shown below, interpolated in slope and width.

Slopes from 6 to 20 % are not in the tables: the removal is extrapolated in a straight line through the 2 % and 6 % values (never below 0).

Outside that (slope 2-20 %, width 10-350 ft) the removal is 0.

The media mix's N and P reductions (the media library) treat what the buffer leaves, a treatment train; with no media the removal is the tables' alone.

The Treatment Depth is not used.

Values

VariableCurrent value
VFS Width30.00 ft
VFS Length800.00 ft
VFS Depth2.00 ft
Width of Area Feeding VFS79.00 ft
Slope of VFS4.00 %
Water storage capacity of soil0.25 in/in
Contributing Area2.002 ac
Watershed Area2.000 ac
Non-DCIA Curve Number80
DCIA Percent50 %
Rainfall ZoneFlorida Zone 4
Treatment Depth1.651 in
Hydraulic Capture0.0 %
Treatment Rate0.052 gpm/sf
N removal75.6 %
P removal92.7 %

Nitrogen buffer table (removal %)

Slope (%) \ Width (ft)102550100350
25060657590
61015254560

Read at slope 4.00 % and width 30.00 ft (interpolated): N removal = 39.00 %.

Phosphorus buffer table (removal %)

Slope (%) \ Width (ft)102550100350
22540556065
6510152565

Read at slope 4.00 % and width 30.00 ft (interpolated): P removal = 27.00 %.