Routing 1 — Summary Report

Retention efficiency lookup: Zone 2
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

Summary Treatment Report: BMP Analysis

Catchments and Associated BMP Types

IDCatchment NameCatchment BMPRouting Destination
1SubdivisionRetentionRouted to Outlet

Volume of Runoff Summary

ScenarioCatchment Area (acres)Runoff Volume (ac-ft/yr)Runoff Volume (in/year)
System Post-Condition (with BMPs)10.001.271.52
Post-Condition (no BMP)10.0010.9213.10

Runoff volumes are shown in acre-feet per year and converted to depth (inches/year) by dividing by area and multiplying by 12.

The catchment area is the same in both post rows: BMPs do not change the area, only how much runoff leaves it. Post-Condition (no BMP) is all the runoff the post-development catchments produce; System Post-Condition (with BMPs) is the runoff that leaves the system at the outlet. BMPs that keep water out of the surface discharge (retention, exfiltration, harvesting and the like) make the with-BMP volume smaller; BMPs that discharge to surface water (wet detention, surface discharge filtration) remove nutrient load but not volume, so the two volumes can be equal.

Summary of Removals

No Specified % Removals

Analysis Type: BMP Analysis

There are no specified % removals defined for this analysis type.

Pre vs. Post Removals

System Removal for TN 88.4%

System Removal for TP 88.4%

Pre/Post comparisons use analysis-type settings to derive required reductions. Values shown to two decimals unless noted.

Nitrogen & Phosphorus Loading

Surface water and groundwater loading summary

Nitrogen (N)
Total N post load23.82 kg/yr
Percent N load reduction88.40 %
Provided N discharge load2.76 kg/yr (6.09 lb/yr)
Provided N load removed (surface)21.06 kg/yr (46.44 lb/yr)

Phosphorus (P)
Total P post load4.402 kg/yr
Percent P load reduction88.40 %
Provided P discharge load0.511 kg/yr (1.126 lb/yr)
Provided P load removed (surface)3.891 kg/yr (8.579 lb/yr)

Values are project totals. Surface units = kg/yr; groundwater recharge in MG/yr and concentrations in mg/L. Values formatted to appropriate precision.