How this treatment's values are worked out: the equations, then the values they are worked with (v1's Equations button). A change on the Entry or Sizing tab shows here at once.
Equivalent Impervious Area EIA (sf) = Contributing Area (sf) x Roof Factor
Volume over EIA (in) = Harvest Volume (gal) / 7.4805 gal/cf / EIA (sf) x 12
Harvest Rate (cf/day) = Harvest Rate (in/week) x Irrigation Area (sf) / (7 x 12)
Rate over EIA (in/day) = 12 x Harvest Rate (cf/day) / EIA (sf)
Harvest Efficiency (%) = REV table lookup of (Volume over EIA, Rate over EIA)
Water Use (gal/yr) = Harvest Rate (in/week) x 52 / 12 x Irrigation Area (sf) x 7.48052 gal/cf
Harvested Water Supply (gal/yr) = Harvest Efficiency / 100 x EIA (sf) x Annual Rainfall (in) / 12 x 7.48052 gal/cf
Supplemental Water Needed (gal/yr) = Water Use - Harvested Water Supply (0 when the supply covers the use)
Roof Factor is set by the selected Roof Type.
Harvest Efficiency is capped at 90%. Below 20%, the lowest REV curve, it is extended along the line between the 20% and 30% curves (beyond the published curves).
N and P removal are equal to the Harvest Efficiency.
The Harvested Water Supply is the share of the runoff from the EIA that the harvest captures.
Values: the harvest efficiency is read from the REV curves of the Rainfall Zone. Non-DCIA Curve Number, DCIA Percent and Treatment Rate are listed for every retention-type BMP but are not used to calculate the harvest efficiency. Treatment Depth is always 0 for Rainwater Harvesting.
| Variable | Current value |
|---|---|
| Total Area Available for Irrigation | 5,000.00 sf |
| Available Harvest Volume | 1,500.00 gallons |
| Available Harvest Rate | 1.00 in/week |
| Contributing Area | 3,049 sf |
| Watershed Area | 3,049 sf |
| Non-DCIA Curve Number | 98 |
| DCIA Percent | 100 % |
| Rainfall Zone | Florida Zone 2 |
| Treatment Depth | 0.000 in |
| Hydraulic Capture | 76.0 % |
| Treatment Rate | (no media mix) |
| N removal | 76.2 % |
| P removal | 76.2 % |