| Watershed Area | 6.00 acres |
| Contributing Area to BMP | 6.00 ac |
| Watershed Non-DCIA Curve Number (0-100) | 85 |
| Watershed DCIA Percent | 65.00 % |
| Rainfall Zone | Florida Zone 2 |
| Rainfall | 51.00 in |
| Vegetated Area (Tree Well) depth | 4.00 ft |
| Tree Well Storage (above media + canopy capture) | 2.00 ft |
| Vegetated Area (Tree Well) Length | 5.00 ft |
| Vegetated Area (Tree Well) Width | 5.00 ft |
| Sustainable water storage capacity of the soil | 0.25 ft |
| Number of Similar Areas in Watershed | 40 |
| Treatment Volume | 0.098 ac-ft |
| Treatment Depth | 0.20 in |
| Retention or Detention | Retention |
| Pipe Span | 48.00 in |
| Pipe Rise | 48.00 in |
| Pipe Length | 200.00 ft |
| Trench/Vault Width | 5.00 ft |
| Trench Depth | 4.50 ft |
| Trench Length | 200.00 ft |
| Void Ratio | 0.25 fraction |
| Pipe Volume | 2,513.27 cf |
| Trench/Vault Volume | 496.68 cf |
| Treatment Volume | 0.07 ac-ft |
| Treatment Depth | 0.14 in over CA |
| Treatment Depth | 0.14 in |
| Time to Recover Design Volume | 72.00 hr |
| Treatment Depth | 1.00 in |
| Retention Volume | 0.500 ac-ft |
| Time to Recover Design Volume | 72.00 hr |
| Provided Nitrogen Treatment Efficiency | 75.9 % |
| Provided Phosphorus Treatment Efficiency | 75.9 % |
When all upstream BMPs consist of Retention BMPs, the sum of the treatment depths are used to calculate efficiency. These are titled Equivalent Treatment Depth and Equivalent Treatment Efficiency.
There is no downstream BMP in this series, so this efficiency is also the treatment efficiency of the Multiple BMP.
| Parameter | Value |
|---|---|
| Equivalent Treatment Depth (in) | 1.333 |
| Equivalent Treatment Efficiency (%) | 83.300 |
| Multiple BMP Provided N Treatment Efficiency (%) | 83 |
| Multiple BMP Provided P Treatment Efficiency (%) | 83 |
| Provided Nitrogen Treatment Efficiency | 83.3 % |
| Provided Phosphorus Treatment Efficiency | 83.3 % |
| Load N: 17.02 kg/yr P: 3.44 kg/yr Q: 14.84 ac-ft/yr | → | Treatment N: 83 % P: 83 % Q: 83 % | → | Surface Discharge N: 2.89 kg/yr P: 0.58 kg/yr Q: 2.48 ac-ft/yr |
| ↓ | ||||
| Mass Reduction N: 14.12 kg/yr P: 2.86 kg/yr Q: 12.36 ac-ft/yr |
The equations behind the values above, and the values they are worked with (v1's Equations page).
Case type: Retention in Series. Calculation used: Retention in Series (one combined retention system).
Retention system (3 retention BMPs as one) [BMP 1 (Tree Well) + BMP 2 (Exfiltration) + BMP 3 (Retention)]
| Segment | BMPs | How it is calculated |
|---|---|---|
| Retention system (3 retention BMPs as one) | BMP 1 (Tree Well) + BMP 2 (Exfiltration) + BMP 3 (Retention) | Treatment depths summed (Equivalent Treatment Depth); removal e from the retention lookup tables; e is the Multiple BMP's removal |
Equivalent Treatment Depth (in) = sum of the Treatment Depths of the retention BMPs
Equivalent Treatment Efficiency e (%) = retention lookup (Equivalent Treatment Depth, non-DCIA CN, DCIA %, rainfall zone)
N removal = P removal = Hydraulic Capture = e
The Multiple BMP detects its scenario from the BMPs in the series and uses the calculation named above.
The steps table lists every calculation in the order it was made, with the values used.
Each BMP's section shows its own equations and its values as they stand after the series calculation.
When all upstream BMPs consist of Retention BMPs, the sum of the treatment depths are used to calculate efficiency. These are titled Equivalent Treatment Depth and Equivalent Treatment Efficiency.
There is no downstream BMP in this series, so this efficiency is also the treatment efficiency of the Multiple BMP.
| Variable | Current value |
|---|---|
| Scenario | Retention in Series |
| Calculation used | Retention in Series (one combined retention system) |
| Runoff into the series | 14.841 ac-ft/yr |
| N load into the series | 17.018 kg/yr |
| P load into the series | 3.44 kg/yr |
| Equivalent Treatment Depth | 1.333 in |
| Equivalent Treatment Efficiency (e) | 83.3 % |
| Hydraulic Capture | 83.3 % |
| N removal (Multiple BMP) | 83.3 % |
| P removal (Multiple BMP) | 83.3 % |
| N load out (surface discharge) | 2.893 kg/yr |
| P load out (surface discharge) | 0.585 kg/yr |
| # | Step | Calculation (values used) | Result |
|---|---|---|---|
| 1 | Inflow to the series | catchment runoff and loads | Q 14.841 ac-ft/yr, N 17.018 kg/yr, P 3.44 kg/yr |
| 2 | Equivalent Treatment Depth | BMP 1 (Tree Well) 0.195 in + BMP 2 (Exfiltration) 0.138 in + BMP 3 (Retention) 1 in | 1.333 in |
| 3 | Equivalent Treatment Efficiency (e) | retention lookup at 1.333 in, non-DCIA CN 85, DCIA 65 %, Florida Zone 2 | 83.3 % |
| 4 | Multiple BMP removal | N = P = Hydraulic Capture = e | 83.3 % |
Part of the combined retention system: its Treatment Depth is added into the Equivalent Treatment Depth. Its own N and P removal below is not applied separately.
Equations
Storage per Area (ac-ft) = Length x Width x (Depth + Soil Storage Capacity) / 43560
Treatment Volume (ac-ft) = Storage per Area x Number of Similar Areas
Treatment Depth (in) = Treatment Volume / Watershed Area (ac) x 12
Notes
Hydraulic capture efficiency is read from the retention efficiency lookup tables for the Treatment Depth.
The lookup also depends on the watershed's non-DCIA curve number, DCIA percent and rainfall zone.
N and P removal are equal to the hydraulic capture efficiency.
Values
| Variable | Current value |
|---|---|
| Vegetated Area (Tree Well) depth | 4.00 ft |
| Vegetated Area (Tree Well) Length | 5.00 ft |
| Vegetated Area (Tree Well) Width | 5.00 ft |
| Sustainable water storage capacity of the soil | 0.25 ft |
| Number of Similar Areas in Watershed | 40 |
| Contributing Area | 6.000 ac |
| Watershed Area | 6.000 ac |
| Non-DCIA Curve Number | 85 |
| DCIA Percent | 65 % |
| Rainfall Zone | Florida Zone 2 |
| Treatment Depth | 0.195 in |
| Hydraulic Capture | 26.3 % |
| Treatment Rate | (no media mix) |
| N removal | 26.3 % |
| P removal | 26.3 % |
Part of the combined retention system: its Treatment Depth is added into the Equivalent Treatment Depth. Its own N and P removal below is not applied separately.
Equations
Pipe Volume (cf) = pi x (Pipe Span / 24) x (Pipe Rise / 24) x Pipe Length
Trench Volume (cf) = (Trench Width x Trench Depth x Trench Length - Pipe Volume) x Void Ratio
Treatment Volume (ac-ft) = (Pipe Volume + Trench Volume) / 43560
Treatment Depth (in) = Treatment Volume / Contributing Area (ac) x 12
Notes
Hydraulic capture efficiency is read from the retention efficiency lookup tables for the Treatment Depth.
The lookup also depends on the watershed's non-DCIA curve number, DCIA percent and rainfall zone.
N and P removal are equal to the hydraulic capture efficiency.
Values
| Variable | Current value |
|---|---|
| Pipe Span | 48.00 in |
| Pipe Rise | 48.00 in |
| Pipe Length | 200.00 ft |
| Trench Length | 200.00 ft |
| Trench/Vault Width | 5.00 ft |
| Trench Depth | 4.50 ft |
| Void Ratio | 0.25 fraction |
| Contributing Area | 6.000 ac |
| Watershed Area | 6.000 ac |
| Non-DCIA Curve Number | 85 |
| DCIA Percent | 65 % |
| Rainfall Zone | Florida Zone 2 |
| Treatment Depth | 0.138 in |
| Hydraulic Capture | 18.6 % |
| Treatment Rate | (no media mix) |
| N removal | 18.6 % |
| P removal | 18.6 % |
Part of the combined retention system: its Treatment Depth is added into the Equivalent Treatment Depth. Its own N and P removal below is not applied separately.
Equations
Treatment Depth (in) = Retention Volume (ac-ft) / Contributing Area (ac) x 12
Notes
Hydraulic capture efficiency is read from the retention efficiency lookup tables for the Treatment Depth.
The lookup also depends on the watershed's non-DCIA curve number, DCIA percent and rainfall zone.
N and P removal are equal to the hydraulic capture efficiency.
Values
| Variable | Current value |
|---|---|
| Retention Volume | 0.500 ac-ft |
| Contributing Area | 6.000 ac |
| Watershed Area | 6.000 ac |
| Non-DCIA Curve Number | 85 |
| DCIA Percent | 65 % |
| Rainfall Zone | Florida Zone 2 |
| Treatment Depth | 1.000 in |
| Hydraulic Capture | 75.9 % |
| Treatment Rate | (no media mix) |
| N removal | 75.9 % |
| P removal | 75.9 % |