Stormwater Harvesting — calculations

Stormwater harvesting: subdivision irrigating common areas — Stormwater Harvesting on Subdivision (stand-alone: this catchment's runoff only)
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

How this treatment's values are worked out: the equations, then the values they are worked with (v1's Equations button). A change on the Entry or Sizing tab shows here at once.

Equations

x = Harvest Volume (ac-ft) x 12 / (Watershed Area (ac) x ROC)

y = Harvest Rate (in/week) x Irrigation Area (ac) / 7 / (Watershed Area (ac) x ROC)

Harvest Efficiency (%) = REV table lookup of (x, y)

Water Use (MGY) = Harvest Rate (in/week) x 52 / 12 x Irrigation Area (ac) x 0.32585 MG/ac-ft

Harvested Water Supply (MGY) = Annual Runoff Volume (ac-ft/yr) x Harvest Efficiency / 100 x 0.32585 MG/ac-ft

Supplemental Water Needed (MGY) = Water Use - Harvested Water Supply (0 when the supply covers the use)

Notes

ROC is the catchment's annual runoff coefficient.

Harvest Efficiency is capped at 90%. Below 20%, the lowest REV curve, it is extended along the line between the 20% and 30% curves (beyond the published curves).

N and P removal are equal to the Harvest Efficiency.

Treatment Depth is back-calculated as the retention depth giving the same efficiency in the retention tables.

Values: the harvest efficiency is read from the REV curves of the Rainfall Zone. Non-DCIA Curve Number, DCIA Percent and Treatment Rate are listed for every retention-type BMP but are not used to calculate the harvest efficiency. Non-DCIA Curve Number and DCIA Percent are used only to back-calculate the Treatment Depth.

Values

VariableCurrent value
Available Harvest Volume6.00 ac-ft
Total Area Available for Irrigation12.00 acres
Available Harvest Rate1.00 in/week
Contributing Area40.000 ac
Watershed Area40.000 ac
Non-DCIA Curve Number75
DCIA Percent25 %
Rainfall ZoneFlorida Zone 2
Treatment Depth1.350 in
Hydraulic Capture90.0 %
Treatment Rate(no media mix)
N removal90.0 %
P removal90.0 %