Swale — calculations

swale example 1 — Swale on roadside (stand-alone: this catchment's runoff only)
Made by BMPFast 2 on Tuesday, 20 October 2026 16:00

How this treatment's values are worked out: the equations, then the values they are worked with (v1's Equations button). A change on the Entry or Sizing tab shows here at once.

Equations

Rainfall Excess Area (ac) = (W x L + Impervious L x Impervious W) / 43560

Flow in Swale (cfs) = Rainfall Excess Area x Rainfall Intensity (rainfall zone)

Depth of Flow d: solved from Manning, Q = 1.486/n x A x R^(2/3) x S^(1/2)

A = B d + Z d^2, P = B + 2 d sqrt(Z^2 + 1), R = A / P

Infiltrated Depth (in) = [L x Infiltration Rate x P / (12 x 3600)] x 6000 x 12 / (Rainfall Excess Area x 43560)

Swale Block Storage (cf) = (w x H / 6) x (sl - Lb) x Nb, w = B + 2 Z H, sl = min(H / S, L / Nb)

Block Depth (in) = 12 x Swale Block Storage / (Rainfall Excess Area x 43560)

Treatment Depth (in) = min(4, Infiltrated Depth + Block Depth)

Treatment Volume (ac-ft) = Treatment Depth x Rainfall Excess Area / 12

Notes

Hydraulic capture efficiency is read from the retention efficiency lookup tables for the Treatment Depth.

The lookup also depends on the watershed's non-DCIA curve number, DCIA percent and rainfall zone.

N and P removal are equal to the hydraulic capture efficiency.

If the Average Pervious Width is less than W, W is used.

Values

VariableCurrent value
Swale Top Width for Flood Conditions - W10.00 ft
Swale Bottom Width - B0.00 ft
Swale Length - L871.20 ft
Average Impervious Length871.20 ft
Average Impervious Width20.00 ft
Average Pervious Width40.00 ft
Swale Slope (foot drop/foot length) - S0.001
Mannings N0.050
Soil Infiltration Rate2.50 in/hr
Side Slope of Swale horizontal/vertical - Z5.00
Average Height of Swale Block - H0.00 ft
Length of Berm Upstream of Crest - Lb0.00 ft
Number of Swale Blocks0
Contributing Area1.200 ac
Watershed Area1.200 ac
Non-DCIA Curve Number85
DCIA Percent60 %
Rainfall ZoneFlorida Zone 1
Treatment Depth0.396 in
Hydraulic Capture38.8 %
Treatment Rate0.052 gpm/sf
N removal38.8 %
P removal38.8 %