SoftwarePlus.ai

All programs › BMPFast › BMPFast 2 sample problems

Filter area for a 20-year service life

Example Problem 3: B&G CTS12, 18 in deep, target 20 years.

1The problem

The BMPFast sample project Example Problem 3: a filter with 18 in of B&G CTS12 after the retention basin. At 1,000 sf, how long do the media last, and what area gives 20 years?

InputValueSource
Project (General Site Information)
Meteorological zoneFlorida Zone 4Zone map (help page 815)
Mean annual rainfall50 inMean annual rainfall map (help page 815)
Performance standard (analysis type)Specified Removal EfficiencyBMPFast sample project
Specified removal: TN / TP75 % / 75 %BMPFast sample project
Catchment 1: catchment 1 (Watershed Characteristics)
Land use, pre / postAgricultural - Pasture / Single-FamilyBMPFast sample project
Area, pre / post11 / 11 acBMPFast sample project
Non-DCIA curve number, pre / post50 / 65BMPFast sample project
DCIA, pre / post0 / 25 %BMPFast sample project
EMC TN, pre / post3.030 / 1.770 mg/LBMPFast land use table (AH Vol I Table 9.2)
EMC TP, pre / post0.593 / 0.327 mg/LBMPFast land use table (AH Vol I Table 9.2)

Find: how many years the filter media last before their phosphorus capacity is used up.

2Steps in BMPFast 2

  1. Start BMPFast 2, choose File ▸ Open and open service-life-target.bmpf (under Files below; it is the BMPFast sample project this problem starts from, saved by BMPFast 2). The tree on the left shows the project, its catchments and their treatments, its routing, and the Calculators. The project’s Entry tab (General Site Information) shows the zone, the rainfall and the type of analysis.

    General Site Information: the project’s Entry tab.
    General Site Information: the project’s Entry tab.
  2. In the tree open Calculators and select Media Filter Service Life. On its Entry tab keep What kind of treatment at Surface Discharge Filter: life against its surface area. Choose the Catchment catchment 1, the Upstream treatment Retention and the Filter media B&G CTS12. BMPFast 2 says what reaches the filter: “Removes nitrogen 75.0 %, phosphorus 75.0 %; captures 75.0 %, so 2.749 of 11.000 ac drains to the filter.”

    Media Filter Service Life: the filter and what feeds it.
    Media Filter Service Life: the filter and what feeds it.
  3. Type 1,000 in Filter surface area (BMPFast 2 suggested “997 sf, the area for a 1.0 in treatment depth (no area meets the removal targets)”) and 18 in Media layer depth. Leave the orthophosphorus share at 1.00. The media’s values: Rate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 90 %. Under Target life type 20 years in Service life wanted: Surface area for that life reads 1,437 sf; the area now is below the target (press Use that area to try it).

    Media Filter Service Life: the surface area, the media and the target life.
    Media Filter Service Life: the surface area, the media and the target life.
  4. Results: Service life 14.7 years. 1.136 kg/yr reaches the filter; it holds back 0.881 kg/yr (its phosphorus removal 77.5 %); orthophosphorus load on the media 0.881 kg/yr. 1,500 cf (1,000 sf × 18 in / 12); it holds 12.94 kg of orthophosphorus.

    Media Filter Service Life: the target life and the service life.
    Media Filter Service Life: the target life and the service life.
  5. At the bottom of the tab the chart plots the life against the surface area; the diamond is this design. Put the area and media into the filter would write them to the filter treatment; this problem only reads the life, so it is not pressed.

    Media Filter Service Life: the life against the surface area.
    Media Filter Service Life: the life against the surface area.
  6. The Calculations tab shows the equations with this problem’s values (v1’s Equations button). The values typed are saved with the project: File ▸ Save.

    Media Filter Service Life: the Calculations tab.
    Media Filter Service Life: the Calculations tab.

3Results

The calculator

On the screenValue
Upstream treatmentRetention
UpstreamRemoves nitrogen 75.0 %, phosphorus 75.0 %; captures 75.0 %, so 2.749 of 11.000 ac drains to the filter.
Filter mediaB&G CTS12
The media's valuesRate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 90 %
Filter surface area1,000 sf
Treatment depth1.003 in
Media layer depth18.00 in
Orthophosphorus share of the phosphorus1.00
Service life wanted20.0 years
Surface area for that life1,437 sf; the area now is below the target
Service life14.7 years
Phosphorus reaching and held by the filter1.136 kg/yr reaches the filter; it holds back 0.881 kg/yr (its phosphorus removal 77.5 %); orthophosphorus load on the media 0.881 kg/yr
Media volume and capacity1,500 cf (1,000 sf × 18 in / 12); it holds 12.94 kg of orthophosphorus

The calculator’s report

Open this report on its own page · The Calculations tab.

BMPFast 2 and BMPFast (v1)

ResultBMPFast 2BMPFast (v1), its page
Nitrogen leaving the site6.150 kg/yr6.150 kg/yrsame
Phosphorus leaving the site1.136 kg/yr1.136 kg/yrsame
Site removal, nitrogen75.006 %75.006 %same
Site removal, phosphorus75.006 %75.006 %same
catchment 1: Retention removal, nitrogen75.006 %75.006 %same
catchment 1: Retention removal, phosphorus75.006 %75.006 %same

Every number BMPFast 2 gives for this problem is the same as BMPFast (v1)’s, to three decimals.

4Check

Method.

Here: 1,500 cf (1,000 sf × 18 in / 12); it holds 12.94 kg of orthophosphorus; 1.136 kg/yr reaches the filter; it holds back 0.881 kg/yr (its phosphorus removal 77.5 %); orthophosphorus load on the media 0.881 kg/yr. Dividing the capacity by the load on the media gives the life on the screen, 14.7 years. The Calculations tab lists each term with the media’s constants. A larger area gives more media, so a longer life, as the chart shows (help page 369, Media and Filtration Methodology).

5Files

  • service-life-target.bmpf: the project, saved by BMPFast 2. Save it (your browser puts it in Downloads), then in BMPFast 2 choose File ▸ Open and open it. Opened again and calculated, it gives the numbers on this page.
  • service-life-target.bmpt: the same project as BMPFast (v1) saved it. BMPFast 2 opens it too (File ▸ Open); saving it then makes a .bmpf and leaves the .bmpt as it was.
  • Routing 1 (BMPFast 2’s report, as Open in browser on its Report tab gives it)
  • Routing 1 — Summary Report (BMPFast 2’s report, as Open in browser on its Report tab gives it)
  • Retention (BMPFast 2’s report, as Open in browser on its Report tab gives it)
  • Retention — calculations (BMPFast 2’s report, as Open in browser on its Report tab gives it)
  • Media Filter Service Life (BMPFast 2’s report, as Open in browser on its Report tab gives it)
  • Media Filter Service Life — calculations (BMPFast 2’s report, as Open in browser on its Report tab gives it)

6Help and methodology

Calculated with BMPFast 2 version 2.0.0 (2026-10-20), which opens the problem’s v1 project as it is. Screen captures are of BMPFast 2’s own window and are for demonstration only.