All programs › BMPFast › BMPFast 2 sample problems
Vegetated natural buffer with plants (detention)
A 100 ft buffer on a 6 % slope; Impaired Water + OFW, Zone 3.
Help: Vegetated Natural Buffer (help page 296) · Download the .bmpf · Link to Solution in BMPFast Version 1
1The problem
A 1.5-acre road edge drains across a 100 ft natural buffer on a 6 % slope. The removal is by the soil and plants (Detention + Plants).
| Input | Value | Source |
|---|---|---|
| Project (General Site Information) | ||
| Meteorological zone | Florida Zone 3 | Zone map (help page 815) |
| Mean annual rainfall | 54 in | Mean annual rainfall map (help page 815) |
| Performance standard (analysis type) | Impaired Water + OFW | Site (illustrative) |
| Catchment 1: Road edge (Watershed Characteristics) | ||
| Land use, pre / post | Undeveloped - Mesic Flatwoods / Highway | Site (illustrative) |
| Area, pre / post | 1.5 / 1.5 ac | Site (illustrative) |
| Non-DCIA curve number, pre / post | 70 / 80 | Site (illustrative) |
| DCIA, pre / post | 0 / 50 % | Site (illustrative) |
| EMC TN, pre / post | 1.087 / 1.250 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| EMC TP, pre / post | 0.043 / 0.173 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| Vegetated Natural Buffer (worksheet) | ||
| Retention or Detention + Plants | Detention + Plants | Design (illustrative) |
| Buffer width | 100 ft | Design (illustrative) |
| Buffer length | 500 ft | Design (illustrative) |
| Storage depth | 0.5 ft | Design (illustrative) |
| Width of feeder area | 130 ft | Design (illustrative) |
| Soil storage capacity | 0.15 in/in | Design (illustrative) |
| Buffer width slope | 6 % | Design (illustrative) |
Find: the TN and TP removal of the BMP, the loads leaving the site, and whether the performance standard is met.
2Steps in BMPFast 2
Start BMPFast 2 and choose File ▸ New project. The tree on the left opens on the project (General Site Information). On its Entry tab enter: Project name Vegetated natural buffer: detention + plants; Meteorological zone Florida Zone 3; Mean annual rainfall 54.00 in; Type of analysis Impaired Water + OFW. (To follow along with the finished project instead, choose File ▸ Open and open
buffer-plants.bmpffrom Files below.)
General Site Information: the project’s Entry tab. Press Add Catchment (left). Select the new catchment in the tree; on its Entry tab type the name Road edge and enter: Land use (pre) Undeveloped - Mesic Flatwoods; Land use (post) Highway; Area (pre) 1.50 ac; Area (post) 1.50 ac; Non-DCIA curve number (pre) 70.00; Non-DCIA curve number (post) 80.00; DCIA (post) 50.00 %. Leave the other boxes as they are (0 or blank). BMPFast 2 calculates as you type; scroll down to Calculated for the results after development: Annual runoff coefficient (ROC) (post) 0.463; Runoff volume (post) 3.125 ac-ft/yr; Nitrogen load (post) 4.817 kg/yr; Phosphorus load (post) 0.667 kg/yr.

The catchment Road edge: its Entry tab. With Road edge selected, press Add Treatment and choose Vegetated Natural Buffer. On its Entry tab type the Treatment name Vegetated Natural Buffer (BMPFast 2 starts it as “Vegetated Natural Buffer 1”) and enter: Retention or detention + plants Detention + Plants; Buffer width 100.00 ft; Buffer length 500.00 ft; Storage depth 0.50 ft; Width of the feeder area 130.00 ft; Soil storage capacity 0.15 in/in; Buffer width slope 6.00 %. The results are calculated as you type: Runoff (feeder) area 1.492 ac; Buffer area 1.148 ac; Treatment depth 0.391 in; Nitrogen removal provided 45.00 %; Phosphorus removal provided 25.00 %.

The treatment Vegetated Natural Buffer: its Entry tab. Open the treatment’s Report tab: its inputs and removal, as a report to print or save.

The treatment Vegetated Natural Buffer: its Report tab. Press Add Routing (left). BMPFast 2 adds Routing 1 under Catchment Routings, with every catchment draining to the outlet and no treatment; a project can have several routings, compared side by side. On its Entry tab (How the routing is calculated Strand routing (v1's routing; use this for permits)) set each catchment as in this table:
Catchment Drains to Treatment used Road edge Outlet Vegetated Natural Buffer A catchment is treated only by the treatment its routing uses.

The routing’s Entry tab: where each catchment drains and the treatment it uses. Open the routing’s Report tab. Results shows the loads leaving the site, the removal provided and required, and whether the performance standard is met; the list at the top of the tab has v1’s reports for the same routing (Summary, Complete, Flow Balance, AH Vol I Sec 9 compliance). Save the project with File ▸ Save; compare it with the .bmpf under Files.

The routing’s Report tab: Results.
3Results
| Result | Value |
|---|---|
| Catchment 1: computed by BMPFast | |
| Annual runoff coefficient (ROC), pre / post | 0.078 / 0.463 |
| Runoff, pre / post | 0.526 / 3.125 ac-ft/yr |
| TN load, pre / post | 0.706 / 4.817 kg/yr |
| TP load, pre / post | 0.028 / 0.667 kg/yr |
| Vegetated Natural Buffer: computed by BMPFast | |
| Treatment depth | 0.391 in |
| Provided TN / TP removal | 45.00 % / 25.00 % |
| TN load in → out | 4.817 → 2.649 kg/yr |
| TP load in → out | 0.667 → 0.500 kg/yr |
| Site (all catchments, at the outlet) | |
| TN load: catchments → outlet | 4.817 → 2.649 kg/yr |
| TP load: catchments → outlet | 0.667 → 0.500 kg/yr |
| Provided removal TN / TP | 45.0 % / 25.0 % |
| Required removal TN / TP (Maximum % Removal) | 95.0 % (not met) / 95.8 % (not met) |
The BMP report
Open this report on its own page.
The Summary Report
Open this report on its own page.
BMPFast 2 and BMPFast (v1)
| Result | BMPFast 2 | BMPFast (v1), its page | |
|---|---|---|---|
| Nitrogen leaving the site | 2.649 kg/yr | 2.649 kg/yr | same |
| Phosphorus leaving the site | 0.500 kg/yr | 0.500 kg/yr | same |
| Site removal, nitrogen | 45.000 % | 45.000 % | same |
| Site removal, phosphorus | 25.000 % | 25.000 % | same |
| Road edge: Vegetated Natural Buffer removal, nitrogen | 45.000 % | 45.000 % | same |
| Road edge: Vegetated Natural Buffer removal, phosphorus | 25.000 % | 25.000 % | same |
Every number BMPFast 2 gives for this problem is the same as BMPFast (v1)’s, to three decimals.
4Check
Runoff and loads (Equations 9-1 and 9-2 of AH Vol I).
| Runoff | = ROC × area × rainfall / 12 |
| = 0.463 × 1.50 ac × 54.0 in / 12 | |
| = 3.125 ac-ft/yr (program 3.125). |
| TN load | = EMC × runoff × 1.233 |
| = 1.250 × 3.125 × 1.233 | |
| = 4.817 kg/yr (program 4.817) |
| TP load | = 0.173 × 3.125 × 1.233 |
| = 0.667 kg/yr (program 0.667). |
1.233 kg is 1 mg/L in 1 ac-ft.
Removal. A buffer with plants (detention) holds no volume. Its removal comes from the buffer tables (based on EPA/600/R-05/118) at a slope of 6 % and a width of 100 ft: TN 45 %, TP 25 % (program 45.00 / 25.00).
Load out.
| TN out | = load in × (1 − removal) |
| = 4.817 × (1 − 45.00 / 100) | |
| = 2.649 kg/yr (program 2.649) |
| TP out | = 0.667 × (1 − 25.00 / 100) |
| = 0.500 kg/yr (program 0.500). |
The standard is not met, and that is expected. “Impaired Water + OFW” requires 95 % TN and 95 % TP, and post not above pre, where the HUC 12 has both an impaired water and an OFW (AH Vol I 8.3.4(a)). The post = pre removal (Equation 9-3, (post load − pre load) / post load) is TN 85.4 % and TP 95.8 %. BMPFast takes the larger of the standard’s percentage and the post = pre removal as the Maximum % Removal, shown on every worksheet’s status bar and in the Summary Report: here TN 95.0 % and TP 95.8 %. This problem shows what this design removes (45.0 % / 25.0 %), which is less. To meet it, add BMPs in series or downstream catchments (see BMPs in Series and Routing), or size the BMP (see Sizing).
The program’s Equations page
5Files
- buffer-plants.bmpf: the project, saved by BMPFast 2. Save it (your browser puts it in Downloads), then in BMPFast 2 choose File ▸ Open and open it. Opened again and calculated, it gives the numbers on this page.
- buffer-plants.bmpt: the same project as BMPFast (v1) saved it. BMPFast 2 opens it too (File ▸ Open); saving it then makes a .bmpf and leaves the .bmpt as it was.
- Routing 1 (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Routing 1 — Summary Report (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Vegetated Natural Buffer (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Vegetated Natural Buffer — calculations (BMPFast 2’s report, as Open in browser on its Report tab gives it)
6Help and methodology
Calculated with BMPFast 2 version 2.0.0 (2026-10-20), which opens the problem’s v1 project as it is. Screen captures are of BMPFast 2’s own window and are for demonstration only.