SoftwarePlus.ai

All programs › BMPFast › Sample problems

Tree wells along a street (retention)

Ten 8 × 8 ft tree wells; BMP Analysis, Zone 2.

1The problem

A half-acre street and sidewalk drain to ten 8 ft × 8 ft tree wells, 3 ft deep, that infiltrate.

InputValueSource
Project (General Site Information)
Meteorological zoneFlorida Zone 2Zone map (help page 815)
Mean annual rainfall50 inMean annual rainfall map (help page 815)
Performance standard (analysis type)BMP AnalysisSite (illustrative)
Catchment 1: Street (Watershed Characteristics)
Land use, pre / postUndeveloped - Mesic Flatwoods / Low-Intensity CommercialSite (illustrative)
Area, pre / post0.5 / 0.5 acSite (illustrative)
Non-DCIA curve number, pre / post70 / 80Site (illustrative)
DCIA, pre / post0 / 85 %Site (illustrative)
EMC TN, pre / post1.087 / 0.930 mg/LBMPFast land use table (AH Vol I Table 9.2)
EMC TP, pre / post0.043 / 0.190 mg/LBMPFast land use table (AH Vol I Table 9.2)
Tree Well (worksheet)
Retention or DetentionRetentionDesign (illustrative)
Vegetated area (tree well) depth3 ftDesign (illustrative)
Tree well storage (above media + canopy capture)0.5 ftDesign (illustrative)
Vegetated area width8 ftDesign (illustrative)
Vegetated area length8 ftDesign (illustrative)
Number of tree well areas10Design (illustrative)
Sustainable water storage capacity of the soil0.20Design (illustrative)

Find: the TN and TP removal of the BMP, the loads leaving the site, and whether the performance standard is met.

2Steps in BMPFast

  1. Press New Project. On General Site Information (the main window; its title bar reads General Site Information and your license key) type the project name Tree wells: retention, streetscape, choose Florida Zone 2, enter 50 in of mean annual rainfall and choose the performance standard BMP Analysis.

    General Site Information (the main window).
    General Site Information (the main window).
  2. Press 1. Enter Catchment. For Catchment 1 type the name Street, choose the land uses Undeveloped - Mesic Flatwoods (pre) and Low-Intensity Commercial (post), enter the areas 0.5 and 0.5 ac, the non-DCIA curve numbers 70 and 80 and the DCIA 0 and 85 %, then press Calculate. BMPFast shows the annual runoff coefficient, the runoff and the TN and TP loads. Press Back.

    Watershed Characteristics Worksheet (1. Enter Catchment).
    Watershed Characteristics Worksheet (1. Enter Catchment).
  3. Press 2. Enter Treatment and then Tree Well. On the Tree Well worksheet: Retention or Detention Retention; Vegetated area (tree well) depth 3 ft; Tree well storage (above media + canopy capture) 0.5 ft; Vegetated area width 8 ft; Vegetated area length 8 ft; Number of tree well areas 10; Sustainable water storage capacity of the soil 0.20. Press Calculate. The report on the worksheet shows the inputs and the results.

    The BMP worksheet after Calculate: the report on the left.
    The BMP worksheet after Calculate: the report on the left.
  4. Press the same button again, now labelled Equations: the worksheet shows each equation with this problem’s values. Press Back to return to the treatment options.

    The same worksheet showing Equations: each equation with this problem’s values.
    The same worksheet showing Equations: each equation with this problem’s values.
  5. On the main window press 3. Configure Catchments and double-click Catchment 1. Choose Tree Well as the BMP used in routing and the Outlet as where it goes. Press Back twice. (A catchment’s BMP is only used once it is chosen here.)

    Routing for Catchment 1 (3. Configure Catchments): the BMP used and where the catchment goes.
    Routing for Catchment 1 (3. Configure Catchments): the BMP used and where the catchment goes.
  6. Press 4. Summary Report. The Report Viewer shows the loads, the removal and whether the performance standard is met. Press Save Project to keep your copy; compare it with the .bmpt under Files.

    The Summary Report (4. Summary Report) in the Report Viewer.
    The Summary Report (4. Summary Report) in the Report Viewer.

3Results

ResultValue
Catchment 1: computed by BMPFast
Annual runoff coefficient (ROC), pre / post0.057 / 0.705
Runoff, pre / post0.119 / 1.469 ac-ft/yr
TN load, pre / post0.159 / 1.684 kg/yr
TP load, pre / post0.006 / 0.344 kg/yr
Tree Well: computed by BMPFast
Treatment depth1.128 in
Hydraulic capture efficiency75.99 %
Provided TN / TP removal75.99 % / 75.99 %
TN load in → out1.684 → 0.404 kg/yr
TP load in → out0.344 → 0.083 kg/yr
Site (all catchments, at the outlet)
TN load: catchments → outlet1.684 → 0.404 kg/yr
TP load: catchments → outlet0.344 → 0.083 kg/yr
Provided removal TN / TP76.0 % / 76.0 %

The BMP report

Open this report on its own page.

The Summary Report

Open this report on its own page.

4Check

Runoff and loads (Equations 9-1 and 9-2 of AH Vol I).

1.233 kg is 1 mg/L in 1 ac-ft.

Storage (as the program calculates it).

The Tree Well Storage entered (0.50 ft) is not part of this equation; it is listed for review.

Treatment depth.

Capture. The retention efficiency tables for Florida Zone 2 at a treatment depth of 1.128 in, non-DCIA CN 80.00 and DCIA 85.0 % give a hydraulic capture of 75.99 % (AH Vol I Appendix O; read the same tables with Tools › Retention Efficiency Lookup Tables, help page 4325). A retention tree well keeps what it captures: the removal equals the capture.

Load out.

The program’s Equations page

Open this report on its own page.

5Files

6Help and methodology

Calculated with BMPFast 1.1.9 (build 6.0.0, 2026-10-16). Older versions may not have the Equations button or may give slightly different results; download the latest at bmpfast.com. Screen captures are for demonstration only.