PLC+ help
This help describes PLC+ 1.0, the release for the PLC instructors reviewing the course. Reviewing it? Start with the testing guide.
PLC+ teaches PLC programming, from electrical and logic basics to ladder logic. Your programs run on simulated machines, so you don't need a real PLC. This page takes you through it in order.
On this page
- Your first time: New learner
- Every day: choose your name and type your PIN
- The path: modules and items
- An item's four tabs
- Checking an exercise
- Module checks and their questions
- My progress
- Handing in a report
- Backups and moving to another computer
- If you forget your PIN
- What the PIN protects
- When you leave: Switch learner and the auto-lock
- For instructors
1. Your first time: New learner
When PLC+ opens, it asks Who is learning? The first time, your name is not on the list yet.
- Choose New learner.
- Type your name. You can also type your student ID; it is optional.
- Choose a PIN of 4 to 6 digits and type it again to confirm it.
- PLC+ shows a recovery code. It is shown only once. Print it or write it down, and keep it somewhere safe. If you ever forget your PIN, this code is the only way to set a new one.
Several students can share one computer. Each one has their own name, PIN and progress file.
2. Every day: choose your name and type your PIN
- On Who is learning?, choose your name.
- Type your PIN.
- Press Open. PLC+ opens on the item you were working on. Later, Go ▸ Continue where I left off takes you to the first item you have not finished.
If the PIN is typed wrong 5 times, PLC+ makes you wait before you can try again, and the wait grows with each further wrong try. This slows down anyone guessing.
3. The path: modules and items
PLC+ has 12 modules, in order, from basics to ladder logic. Each module is a list of items, and each module ends with a module check. Work down the list.
In version 1.0, modules 1 to 8 and 11 (from electrical foundations to timers, data, sequencing and troubleshooting) are written as first drafts, with an exercise or practice questions on every item and a module check each. Modules 9, 10 and 12 come later.
4. An item's four tabs
Each item has four tabs. Go through them from left to right.
- Learn — the lesson. Read it first.
- Example — a working program running on a simulated machine, so you can watch what it does. It also shows a common mistake, so you can see what goes wrong and why.
- Exercise — your turn. Either write your own ladder program in the editor and check it, or answer questions.
- Reference — the symbols and rules for the item, with their Allen-Bradley names. Come back to it whenever you need to look something up.
The simulated machines are: pilot lights, a motor start/stop station, a traffic light, a garage door, a tank and a conveyor sorter.
5. Checking an exercise
When an exercise asks for a ladder program:
- Write your program in the editor on the Exercise tab.
- Press Check my program. PLC+ runs your program against a set of tests on the machine.
- Read the results. They tell you which tests passed and which did not. Fix your program and press Check my program again as many times as you need.
If you are stuck, look at the Example tab again and the Reference tab.
6. Module checks and their questions
Each module ends with a module check. It shows whether you have learned what the module teaches. Its questions come in five kinds:
- Multiple choice — choose the right answer.
- A number — type the number asked for.
- A truth table — fill in the outputs for each combination of inputs.
- Matching — match each symbol to its name.
- Find the fault — a machine has a broken or shorted wire. Watch what it does and find the fault.
7. My progress
My progress is at the top of the path. It shows, on one page:
- each module and its state;
- the module checks, which are the points where your work counts;
- your outcomes (what each module teaches you to do), each with a mark, and a review suggested list of what to go over again;
- the time you have spent in PLC+.
The marks for each outcome:
| Mark | Means |
|---|---|
| ★ | mastered |
| ↺ | review suggested |
| ◐ | in progress |
| ○ | not started |
8. Handing in a report
At each module check, you make a progress report to hand in to your instructor. PLC+ makes it as a PDF file. You save it, and hand it in the way your instructor asks, usually by uploading it to an assignment. PLC+ never sends anything itself.
- Choose Hand in a report, the second row of the path (or Go ▸ Hand in a report, Ctrl+Shift+R; a module check's page has a Hand in a report… button too).
- Choose the module check, or Everything so far for a full report. The card shows what the report will say: Complete or Incomplete, your name, your overall score, your items, outcomes and time, and anything still to do.
- Press Save the PDF report…. The first time, PLC+ asks for your details for reports: student ID, course, section, e-mail and your instructor's class code. They are all optional; only your name is required. Then choose where to save the file (the desktop, a USB drive or a cloud folder).
- Under 3. Hand it in: upload the PDF where your instructor asks. If they also ask for the result line (one line that starts
PLC1|), press Copy the result line and paste it where they say. Send to my instructor… starts an e-mail with the line in it and opens the folder with the PDF, so you can attach it.
You can make a report before a module check is complete. It says Incomplete on its cover and lists what is missing; your instructor decides whether to accept it. Every report you make is listed under Reports you have made, with its ID, so you can show what you handed in, and copy its result line again.
The report shows, for each item: its status, your best score, how many times you checked it, the time you spent, the hints you were shown and each test's result. It also shows your outcomes and, if you leave it ticked, a picture of each program that passed.
Do not change the PDF. Each report is signed. Opening and saving it again in another program (adding a highlight, "Print to PDF") changes the file, and your instructor's check then says it was changed. Hand in the file exactly as PLC+ saved it.
9. Backups and moving to another computer
Your progress is kept on the computer, in your own file. If that computer is lost, broken or wiped, your progress goes with it. Backups are required. PLC+ reminds you when you leave and when you finish a module.
To back up: choose Learner ▸ Back up my progress. PLC+ saves a copy of your file (it ends in .plcprogress). Save it to a USB drive or to a cloud folder, such as OneDrive, so it is not only on this computer.
To carry on on another computer: open PLC+ there and choose Add learner from file, then choose your backup file. If you are already on that computer, PLC+ combines the two copies and nothing is lost.
10. If you forget your PIN
On Who is learning?, choose your name, then Forgot my PIN. Type the recovery code you were given when you were added, then choose a new PIN.
Without the recovery code, the PIN cannot be reset. Keep the code safe.
11. What the PIN protects
The PIN is a lock for the classroom, not a safe. It stops another student at the same computer from opening your progress by mistake or as a prank. It cannot stop a determined person who copies your file and attacks it: a PIN of 4 to 6 digits is too short for that. Don't treat your progress file as secret.
12. When you leave: Switch learner and the auto-lock
- When you are done, choose Learner ▸ Switch learner. PLC+ goes back to Who is learning? for the next student.
- If nobody uses PLC+ for 15 minutes, it locks itself. Your work is saved first; you type your PIN to carry on.
- To take your name off a computer, choose Remove from this computer. It asks for your PIN, then sends your file to the Recycle Bin. Back up first if you want to keep your progress.
13. For instructors
- Where the files are. On a lab computer, the learners' files are kept in
C:\ProgramData\PLCPlus\Learners. That folder is shared by every Windows account on the computer, so a student sees their name whoever is signed in to Windows. - Settings. Settings on the start screen (Who is learning?) are for everyone who uses PLC+ on the computer, so an instructor usually sets them once: where the learners' files are kept (for example, a shared drive on a lab network), and how long PLC+ waits without use before it locks itself (15 minutes unless you change it). Changing the folder does not move anyone's files; bring them over with Add learner from file.
- Removing a student without their PIN (for example, a student who has left, or who forgot their PIN and lost the recovery code): on the start screen, press Open the learners' folder. Close PLC+, then delete that student's file from the folder. Open PLC+ again.
- Reports. Learners hand in a PDF progress report at each module check, and may paste a one-line result line as well (section 8). You read the PDF in your LMS or any PDF reader; no software is needed.
- Checking a report. In PLC+, choose File ▸ Check a report (for instructors), or Check a report on the start screen (no learner account is needed). Choose the PDF, paste the result line, or both, and press Check. PLC+ says whether the report is genuine and unchanged since the learner saved it, and shows what it said when it was made. Download the PDF from the LMS as it is: a copy that was annotated or printed to PDF no longer checks out.
- Class codes. In the same window, Make a class code… makes a 16-character code. Give it to your class; each learner types it in My details for reports. Their reports and result lines are then signed with it, and the check says so. A result line signed with the code can be checked with the code alone. Keep the code; make a new one each term.
- The limits. PLC+ runs on the learner's own computer, offline. The signature proves a report was not changed after PLC+ made it; it cannot prove that nobody tampered with that computer. For a high-stakes assessment, use the lab or a proctored challenge.