SoftwarePlus.ai

All programs

PLC+

Learn PLC programming at home, with simulated machines in place of real hardware.

FreeVersion 1.0 for invited PLC instructorsFor Windows PCs

What it is

PLC+ teaches you to program a PLC (programmable logic controller), the small computer that runs machines in factories and plants. It starts with electrical and logic basics and goes on to ladder logic. You don't need a PLC: your programs run on simulated machines on the screen.

PLC+ is the self-paced half of a PLC course. The lab, with real hardware, is the other half. You work through the lessons at home, at your own pace, and bring what you learned to the lab.

PLC+ works offline. Your progress stays on your computer, in your own file.

PLC+ 1.0 is on the Microsoft Store for the PLC instructors invited to review it, through a link in their invitation; its Store page is hidden while they do. After their review it will be free on the Microsoft Store for everyone, and this page will link to it.

Help

How to use PLC+: your first time, signing in each day, the four tabs of each item, checking your work, module checks, your progress, backups, and notes for instructors on lab computers.

For instructors reviewing PLC+

The testing guide: how to install PLC+ 1.0, a guided tour from making a learner to checking a student's report, what to look at in each module, and how to send your notes.

What you can do

  • Follow a path of 12 modules, from basics to ladder logic. Each module is a list of items and ends with a module check.
  • Work through each item in four tabs: Learn (the lesson), Example (a working program running on a simulated machine, and a common mistake), Exercise (write your own ladder program and check it, or answer questions) and Reference (the symbols and rules, with their Allen-Bradley names).
  • Write ladder programs in the editor and press Check: PLC+ runs your program against tests and tells you what passed and what did not.
  • Run your programs on simulated machines: pilot lights, motors, a traffic light, a garage door, tanks, sorters, timers and counters, thumbwheels and numeric displays, and pneumatic cylinders.
  • Answer module-check questions: multiple choice, a number, a typed answer (such as binary or hex), a truth table, matching symbols to names, and finding the fault on a machine with a broken or shorted wire or a failed device.
  • Make a signed PDF progress report at each module check and hand it in; instructors can check that a report was not changed.
  • See your mastery of each outcome: ★ mastered, ↺ review suggested, ◐ in progress, ○ not started.
  • See your progress on one page: each module's state, the module checks, your outcomes with a list of what to review, and the time you have spent in PLC+.
  • Share one computer with other students. Each student chooses their name and types their own PIN.
  • Back up your progress to a USB drive or a cloud folder, and carry on from another computer.

Who it is for

Students taking a PLC course; the faculty in a grant's training cohort who are learning to teach PLCs; and instructors, who use PLC+ beside their lab.

Version 1.0, for instructors

In version 1.0, modules 1 to 8 and 11 (from electrical foundations to timers, data, sequencing and troubleshooting) are written as first drafts, with an exercise or practice questions on every item and a module check each. Modules 9, 10 and 12 come later. At each module check, learners make a signed PDF progress report to hand in, and instructors can check that a report was not changed.

Privacy

PLC+ works offline and sends nothing. Each learner's progress stays on the computer, in their own file, until they choose to hand in a report. The privacy policy.

Who made it

Created by Dr. Ron Eaglin.