All programs › BMPFast › Sample problems
Stormwater harvesting for common-area irrigation
6 ac-ft harvested at 1.0 in/week over 12 ac; Net Improvement, Zone 2.
Help: Stormwater Harvesting (help page 308) · Download the .bmpt · Link to Solution in BMPFast Version 2
1The problem
A 40-acre subdivision harvests up to 6 ac-ft from its pond to irrigate 12 ac of common area at 1.0 in/week.
| Input | Value | Source |
|---|---|---|
| Project (General Site Information) | ||
| Meteorological zone | Florida Zone 2 | Zone map (help page 815) |
| Mean annual rainfall | 50 in | Mean annual rainfall map (help page 815) |
| Performance standard (analysis type) | Net Improvement | Site (illustrative) |
| Catchment 1: Subdivision (Watershed Characteristics) | ||
| Land use, pre / post | Agricultural - Pasture / Single-Family | Site (illustrative) |
| Area, pre / post | 40 / 40 ac | Site (illustrative) |
| Non-DCIA curve number, pre / post | 61 / 75 | Site (illustrative) |
| DCIA, pre / post | 0 / 25 % | Site (illustrative) |
| EMC TN, pre / post | 3.030 / 1.770 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| EMC TP, pre / post | 0.593 / 0.327 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| Stormwater Harvesting (worksheet) | ||
| Max available harvest volume | 6.0 ac-ft | Design (illustrative) |
| Harvest rate | 1.0 in/week | Design (illustrative) |
| Area available for irrigation | 12 ac | Design (illustrative) |
Find: the TN and TP removal of the BMP, the loads leaving the site, and whether the performance standard is met.
2Steps in BMPFast
Press New Project. On General Site Information (the main window; its title bar reads General Site Information and your license key) type the project name Stormwater harvesting: subdivision irrigating common areas, choose Florida Zone 2, enter 50 in of mean annual rainfall and choose the performance standard Net Improvement.

General Site Information (the main window). Press 1. Enter Catchment. For Catchment 1 type the name Subdivision, choose the land uses Agricultural - Pasture (pre) and Single-Family (post), enter the areas 40 and 40 ac, the non-DCIA curve numbers 61 and 75 and the DCIA 0 and 25 %, then press Calculate. BMPFast shows the annual runoff coefficient, the runoff and the TN and TP loads. Press Back.

Watershed Characteristics Worksheet (1. Enter Catchment). Press 2. Enter Treatment and then Stormwater Harvesting. On the Stormwater Harvesting worksheet: Max available harvest volume 6.0 ac-ft; Harvest rate 1.0 in/week; Area available for irrigation 12 ac. Press Calculate. The report on the worksheet shows the inputs and the results.

The BMP worksheet after Calculate: the report on the left. Press the same button again, now labelled Equations: the worksheet shows each equation with this problem’s values. Press Back to return to the treatment options.

The same worksheet showing Equations: each equation with this problem’s values. On the main window press 3. Configure Catchments and double-click Catchment 1. Choose Stormwater Harvesting as the BMP used in routing and the Outlet as where it goes. Press Back twice. (A catchment’s BMP is only used once it is chosen here.)

Routing for Catchment 1 (3. Configure Catchments): the BMP used and where the catchment goes. Press 4. Summary Report. The Report Viewer shows the loads, the removal and whether the performance standard is met. Press Save Project to keep your copy; compare it with the .bmpt under Files.

The Summary Report (4. Summary Report) in the Report Viewer.
3Results
| Result | Value |
|---|---|
| Catchment 1: computed by BMPFast | |
| Annual runoff coefficient (ROC), pre / post | 0.032 / 0.262 |
| Runoff, pre / post | 5.400 / 43.667 ac-ft/yr |
| TN load, pre / post | 20.174 / 95.299 kg/yr |
| TP load, pre / post | 3.948 / 17.606 kg/yr |
| Stormwater Harvesting: computed by BMPFast | |
| Treatment depth | 1.350 in |
| Hydraulic capture efficiency | 90.00 % |
| Provided TN / TP removal | 90.00 % / 90.00 % |
| TN load in → out | 95.299 → 9.530 kg/yr |
| TP load in → out | 17.606 → 1.761 kg/yr |
| Site (all catchments, at the outlet) | |
| TN load: catchments → outlet | 95.299 → 9.530 kg/yr |
| TP load: catchments → outlet | 17.606 → 1.761 kg/yr |
| Provided removal TN / TP | 90.0 % / 90.0 % |
| Required removal TN / TP (Maximum % Removal) | 78.8 % (met) / 77.6 % (met) |
The BMP report
Open this report on its own page.
The Summary Report
4Check
Runoff and loads (Equations 9-1 and 9-2 of AH Vol I).
| Runoff | = ROC × area × rainfall / 12 |
| = 0.262 × 40.00 ac × 50.0 in / 12 | |
| = 43.667 ac-ft/yr (program 43.667). |
| TN load | = EMC × runoff × 1.233 |
| = 1.770 × 43.667 × 1.233 | |
| = 95.299 kg/yr (program 95.299) |
| TP load | = 0.327 × 43.667 × 1.233 |
| = 17.606 kg/yr (program 17.606). |
1.233 kg is 1 mg/L in 1 ac-ft.
REV coordinates.
| Effective impervious area | = area × ROC |
| = 40.00 × 0.262 | |
| = 10.480 ac (program 10.480). |
| x | = volume × 12 / EIA |
| = 6.00 × 12 / 10.480 | |
| = 6.8702 in (program 6.8702) |
| y | = rate × irrigated area / 7 / EIA |
| = 1.00 × 12.00 / 7 / 10.480 | |
| = 0.1636 in/day (program 0.1636). |
Capture. The REV curves of Florida Zone 2 at (x, y) give 90.00 %, the TN and TP removal. Demand 16.944 MG/yr, supply 12.806 MG/yr, supplemental water 4.138 MG/yr (Harvesting and Greenroof Methodology).
Load out.
| TN out | = load in × (1 − removal) |
| = 95.299 × (1 − 90.00 / 100) | |
| = 9.530 kg/yr (program 9.530) |
| TP out | = 17.606 × (1 − 90.00 / 100) |
| = 1.761 kg/yr (program 1.761). |
The program’s Equations page
5Files
- stormwater-harvesting-irrigation.bmpt: the project, saved by BMPFast. Save it (your browser puts it in Downloads). In BMPFast press Open Project, then Open Project again in the Open BMPFast Project dialog (below its Recent Projects list), and choose the file.
- Equations page (worksheet) (as BMPFast shows it)
- Summary Report (as BMPFast shows it)
- BMP report (worksheet) (as BMPFast shows it)
6Help and methodology
Calculated with BMPFast 1.1.9 (build 6.0.0, 2026-10-16). Older versions may not have the Equations button or may give slightly different results; download the latest at bmpfast.com. Screen captures are for demonstration only.