SoftwarePlus.ai

All programs › BMPFast

Questions answered

Questions from BMPFast users, each answered with a worked example: the calculations BMPFast Plus makes, with its own numbers, and the project to open and try.

Routing

Dry retention basins in series: why did the series remove less than the basins alone?

  • Two identical catchments, each with a dry retention basin (0.5 and 0.8 ac-ft); Catchment 1 drains to Catchment 2. BMPFast Plus gave 69.82 % in series against 73.76 % for the basins alone. How Treatment Depth Allocation calculates it, why it comes out lower, and a volume balance proposed in its place, which can never fall below the basins alone. Under review.Retention · Routing · Retention basins in series

The treatment depth of a filter below a routed wet pond

  • Catchment 1's wet pond discharges to Catchment 2's wet pond, which has filter media. Is the filter's treatment depth its volume over Catchment 2, or over Catchments 1 and 2? Every efficiency and the loads at the outlet, step by step.Wet Detention · Surface Discharge Filter · BMPs in Series · Routing

Wet Detention

How are littoral zone credits handled in BMPFast (v1) and BMPFast Plus, and how are they different?

  • BMPFast Plus adds a credit: the wet pond equations are taken as a pond without a littoral zone, and a pond with one gets the credit the designer enters, 0 to 10 percentage points, added to its N and P removal. BMPFast (v1) reduces: the equations are taken as a pond with a littoral zone, and a pond without one gets 90 % of their removal. On a pond with a 100-day residence time: BMPFast Plus N 51.9 % / P 84.0 % with a littoral zone, v1 N 41.9 % / P 74.0 %. v1's method stays a choice in BMPFast Plus, "How the littoral zone counts" on the pond's Entry tab.Wet Detention · help page 5068, with both methods worked and compared

Have a question? Write to info@bmpfast.com.