BMPFast Version Summary
What each release of BMPFast added and fixed, newest first, and what is new in BMPFast Plus, version 2.
Which version do you have?
Open BMPFast: the Welcome screen shows the date your copy was built. Your version is the newest one below dated on or before that date. (Inside the program the number 6.0.0 is shown in some places; it has not changed since the first release, so go by the date.) The version on offer now is on the download page, and it is in the installer's name. A licensed copy updates by installing the new version over it; your license key keeps working.
BMPFast version 2 is called BMPFast Plus. It is on the Microsoft Store, uses the same license keys, and opens your BMPFast (.bmpt) projects. Both BMPFast and BMPFast Plus are supported and will go on being supported. In BMPFast Plus, Help ▸ About shows the version (2.x). What is new in BMPFast Plus, and its versions, follow BMPFast's below.
- New: something added.
- Change: works or reads differently.
- Results: a project's calculated numbers can differ from the earlier version — check projects already submitted.
- Fix: was wrong, now right.
- Help: the help pages.
Version 1.1.10 built October 29, 2026 · in testing, not on the download page yet
Being tested now; the download page on bmpfast.com still offers 1.1.8. When 1.1.10 is posted there it brings these changes together with 1.1.9's. The BMPFast help pages already describe them.
- New: New Project from an existing project: start with its General Site Information and, if you choose, its catchments.
- New: Filters in series: the equivalent treatment depth as a choice beside the Handbook equation, on the Catchment Configuration.
- New: Media Filter Service Life is a plotting form like Filter Sizing: the upstream BMP and the media, the life against the filter area or its phosphorus removal, and a target life.
- New: A water budget for harvesting and greenroofs; the REV curves carry on as dashed lines past their last value.
- New: Warnings on the worksheet and in the report for values outside a method's range — a Vegetated Filter Strip width outside 15–30 ft, broken exfiltration trench rules, a media layer thinner than the mix's minimum, a MAPs credit above Appendix O's 12 %, a littoral zone credited twice in a series. The values are still calculated.
- New: Tooltips and Help buttons on every window; Sizing notes the catchments routed into the BMP.
- Change: "Rational C Values" renamed "Annual Runoff Coefficients (ROC)"; a copied catchment is named "Copy of …"; a new project starts at 52 in of rainfall; Esc on the Routing screen works as Back.
- Change: Discovery Plots and Cost Analysis: the Close button says Back, as on the other screens.
- Change: Summary Report: under Pre vs. Post Removals the row before TN and TP says "Required", and the question reads "Is removal (post<=pre) … met?"; the Maximum Removals section is now "Specified Removals"; the notes at the end of each section start "Note:". Wording only — no numbers change.
- Results: Exfiltration, Tree Well, Swale and the buffers keep their Treatment Volume; in a routing it is spread over the upstream area instead of giving 0 removal.
- Results: The Vegetated Filter Strip's Detention system now treats, with its media, what the buffer tables leave (a treatment train).
- Results: Greenroof with a cistern: the removal rises with the cistern's storage and is never below the value without a cistern, so a small cistern no longer scores worse than none.
- Results: Wet detention ponds in series: each pond is calculated with all the runoff reaching it, and the strand report and the outlet agree.
- Results: Retention BMPs in series in a strand add their Treatment Depths (one system).
- Results: Swale: the extra 10 % concentration reduction is removed.
- Results: In a routing a surface discharge filter removes no runoff, and a User Defined BMP removes only the hydraulic capture entered (shown in its report).
- Fix: The Summary Report keeps the routing's outlet loads (it showed the untreated totals and changed the project's results).
- Fix: Retention efficiency no longer fails for a curve number above 80 at a treatment depth under 0.25 in.
- Fix: A land use whose name the list no longer has exactly is kept with its EMCs, not saved blank.
- Fix: Swale: a warning when the pervious width is less than the swale's top width; a slope of 0 is refused.
- Fix: The load diagram balances for a BMPs in Series and shows a Wet Detention's runoff.
- Fix: A license is removed from a computer only when bmpfast.com confirms it; otherwise you are told it could not be removed.
- Fix: Rainwater Harvesting directly before a Wet Detention in a BMPs in Series is refused, as Stormwater Harvesting is.
- Help: Every help page on bmpfast.com rewritten, with the Applicant's Handbook references, sources, methodology pages, method comparisons and 68 sample problems.
Version 1.1.9 built October 2, 2026 · not on the download page yet
Not available to download yet: the download page on bmpfast.com still offers 1.1.8. These changes will reach you with 1.1.10.
- New: Vegetated Filter Strip: a System Type, Retention or Detention, with its own labels.
- New: Vegetated Natural Buffer: Retention, or Add Soils-Plants.
- New: Rain Garden: Retention or Detention. A Detention rain garden captures no runoff; its removal is the cover crop credit and then the media.
- New: BMPs in Series Equations report: which case was calculated, a table of every step, and each BMP's own equations.
- New: Equations pages show the Hydraulic Capture and Treatment Rate values, the buffer tables when used, and a Recovery-Time Adjustment section for Retention, Exfiltration and Permeable Pavement; Wet Detention shows the Annual Runoff Volume.
- New: Land use "Undeveloped – Upland Mixed Forest".
- Results: A BMPs in Series that starts with retention is calculated as one retention system, then as a treatment train; pond-to-pond routing corrected.
- Results: One rule for buffers and filter strips; one media residence-time rule for every BMP with media (the filter read the answer wrongly); rain garden loads recalculated after its removal.
Version 1.1.8 September 17, 2026 · on the download page now
- New: Media mix library: every mix with its values (the built-in ones to read), and your own mixes to add, edit, rename, delete and choose.
- Change: Surface Discharge Filter sizing recalculates the area when the upstream BMP or the media changes; when no area meets the targets the area is blank with a red message; the "Use" button is hidden.
- Change: Rain Garden shows the chosen mix's nitrogen and phosphorus removal at once; a wait cursor while recalculating.
- Fix: A typed treatment depth no longer freezes the filter area; boxes you did not edit no longer count as edits.
Version 1.1.7 September 7, 2026
- New: Sizing: size a BMP's dimensions against its nitrogen and phosphorus removal targets, with charts; Surface Discharge Filter sizing.
- New: BMPs in Series: the Retention → Surface Discharge Filter case; Insert, Remove and Open on each series row; the equivalent treatment numbers explained.
- New: A read-only Routing Diagram (Catchment Configuration → Diagram), with a report menu for each catchment.
- New: An Equations link on every treatment; .bmpt files open BMPFast when double-clicked; a wait cursor while a project opens.
- Results: Swale concentration reduction 10 % (was 30 %).
- Results: The routing's volume out uses the hydraulic capture (not the nitrogen removal), so retention → detention or filtration no longer understates the outlet volume; the BMPs in Series load diagram matches.
- Fix: The harvesting efficiency no longer jumps at a curve boundary, and the unsupported part of the curve is marked.
- Fix: Equations-page notes (buffer or filter strip, the recovery-time note only where it applies, ROC for stormwater harvesting, wet detention wording); sizing arrows step from the value typed.
Version 1.1.6 August 16, 2026
- New: Applicant's Handbook Volume I, Section 9 compliance report: the project's inputs and results in the order and terms of the Handbook (Sections 8.3 and 9, Tables 9.1–9.2, Equations 9-1 to 9-5, Appendices M, N and O), loads in kg and lb, and pass or fail.
- New: Main window button 8, Custom Reports, and a Reports menu entry for it; the learning modules linked in the references.
Version 1.1.5 July 10, 2026
- New: A styled routing balance diagram; section dividers in the Complete Report.
- Results: Swale, Exfiltration, Tree Well and Vegetated Natural Buffer are calculated as retention BMPs; only retention BMPs fed by a junction are recalculated in a routing.
- Results: BMPs that treat only their own catchment (harvesting, greenroof, rain garden, tree well, buffers) get 0 % treatment, with a warning, when upstream catchments drain to them.
- Fix: Vegetated Natural Buffer removal corrected.
Version 1.1.4 July 9, 2026
- Change: The routing table leads the Complete Report; the report buttons work for routed networks.
- Results: Strand-based routing is the official routing: any network of catchments, solved in order, with runs that meet the conditions calculated as single systems; the Summary Report's numbers come from it.
Version 1.1.3 July 7, 2026
- New: Design Curves (now Discovery Plots): sweep a design value and plot the removal against it, with the current value and the targets marked; opened from General Site Information and the Catchment Configuration.
- New: Summary Report "Summary of Removals", with the specified (or pre/post) and provided removals side by side and a Maximum block.
- Change: "BMPTrains" changed to "BMPFast" in the Save dialog and About; Exfiltration volumes relabelled; groundwater analysis is No when not set; older report screens removed (no change to results).
- Fix: Design Curves plotted against the average residence time (ART) and for Net Improvement corrected.
- Fix: License activation explains its errors and works when a firewall blocks the check.
Version 1.1.2 May 29, 2026
- Change: Older report screens removed (no change to results); small wording changes.
- Fix: License activation made stable, with the license kept in more than one place.
- Fix: The retention screen's target maximum uses the true maximum removal.
Version 1.1.1 May 27, 2026
- Change: Vegetated Natural Buffer: the buffer width slope accepted from 2 to 20 % (was 2 to 6 %).
- Change: "RT" relabelled "ART" (average residence time).
- Fix: License activation path error when activating again.
Version 1.1.0 May 21, 2026
- New: Life-cycle Cost Analysis: each BMP's components and routine costs, present worth, annual cost, cost per pound of nitrogen and phosphorus, a Unit Cost Summary with project totals, and a cost database you can edit (Update Database).
- New: A maintenance activity guide.
- New: Routing where strands meet (strand to strand), with a Full Routing Diagram for each strand and a warning on strand-based routing.
- New: Project name on General Site Information; the targets on the treatments' bottom toolbar; the performance standards display reworked.
- Fix: The removal required for each analysis type, and the target treatment efficiencies, corrected.
- Fix: Independent catchments routing (its input breakdown, method note and system removal); a system removal above 100 % in strand-to-strand routing.
- Fix: License activation path error on some Windows set-ups; the installer removes the old version and closes BMPFast before installing.
Version 1.0.9 April 20, 2026
- Change: A new installer.
No release notes were kept for versions 1.0.4 to 1.0.8.
Version 1.0.3 April 3, 2026
- Change: The old license check removed.
Version 1.0.2 April 2, 2026
- New: License keys bought and checked at bmpfast.com, with the key's status and your registration information.
Version 1.0.1 March 27, 2026
- New: Help on every form, opening its page on bmpfast.com.
- New: Print preview of the report on every BMP screen.
- New: Strand routing: runs of catchments routed one into another calculated as strands.
- Results: The recovery-time adjustment (for the time to recover the design volume).
- Fix: No Treatment routed into a Retention or a Detention catchment now passes its loads correctly, and the routing outlet totals are right.
- Fix: A Stormwater Harvesting calculation error; the total pre-development nitrogen and phosphorus with several catchments.
Version 1.0.0 November 8, 2025
- New: The first release as BMPFast, sold at bmpfast.com with a license and the education and training course.
- New: The calculations and worksheets of BMPTrains 2020, with reports reworked during 2025, every value shown with its label and units, a new splash screen, and license protection.
Before BMPFast the BMPTrains 2020 program, 2022–2023
BMPFast grew from BMPTrains 2020, the program of the BMPTrains (FDOT) team:
- 5.0.0 — January 2022.
- 5.1.0 — April 2022.
- 5.2.0 — July 2022: routing in series fixed.
- 5.3.0 — October 2022: rain garden additions.
- 5.3.1 — October 2022: detention with media for rain gardens fixed.
- 5.3.2 — January 2023: Net Improvement removal to 2 decimals.
BMPFast Plus (BMPFast version 2)
BMPFast version 2 is called BMPFast Plus. The name came with version 2.0.3; the builds before it (2.0.0 to 2.0.2) were called "BMPFast 2", and you may still see that name in older notes and on the sample-problem pages.
BMPFast Plus is BMPFast rebuilt: the same calculations, checked against BMPFast on every sample project, in a new interface with more features. Its versions are 2.x; Help ▸ About shows yours, and Help ▸ Check for a new version asks the Microsoft Store for a newer one.
- Both versions are supported. BMPFast (versions 1.x, from bmpfast.com) and BMPFast Plus (version 2.x) will both go on being supported and updated. Use whichever suits you.
- BMPFast Plus reads BMPFast files. It opens BMPFast projects (.bmpt) and gives their numbers when BMPFast's methods are chosen. It never changes the .bmpt file: it saves the project as a BMPFast Plus project (.bmpf), so your original stays as it was for BMPFast. The notes from opening a .bmpt (anything it had to change or drop) are kept in a text file you can open from File ▸ Notes from opening the v1 file.
- The same license. A BMPFast license key bought at bmpfast.com works in BMPFast Plus. The program itself is free on the Microsoft Store; without a license it opens any project to look at, print and save reports from, read-only.
- Where to learn it: the sample problems in BMPFast Plus and the questions answered, worked in BMPFast Plus.
New features in BMPFast Plus
Compared with BMPFast (version 1):
- New: Any number of treatments on a catchment, even several of the same type, so design options sit side by side; BMPs in Series of up to four.
- New: Several Catchment Routings in one project, compared side by side: outlet nitrogen and phosphorus loads, removal achieved, and whether each target is met.
- New: You choose the calculation method wherever there is more than one, with BMPFast's method always one of the choices: filters in series (the Handbook equation or the equivalent treatment depth), retention basins in series (Treatment Depth Allocation, efficiencies in series, or BMPFast's added Treatment Depths), the wet detention littoral zone (a credit of up to 10 points, or BMPFast's method — see Questions answered), the recovery-time credit (optional), and a credit for plants on buffers and filter strips.
- New: Three treatment types of their own: Baffle Box (first or second generation, or with a media filter), Hydrodynamic Separator, and Catch Basin Insert.
- New: Loads not carried by runoff can be entered, with their source and basis, on their own report line.
- New: Reports you name and keep with the project, made from the current values each time you open them; every report printed or saved as a web page, PDF, Word or CSV file.
- New: Undo for every change, and a recovery copy kept while you work; after a crash you are asked whether to open it, and it is never thrown away without asking.
- New: Values outside a method's tables are calculated with a warning on the screen and in the reports, instead of being refused.
- New: Installed and updated through the Microsoft Store, for each user, with no administrator rights; Help ▸ Check for a new version.
How the interface differs from BMPFast
- Change: One window instead of a main menu of numbered buttons opening separate windows. On the left is the project as a tree: General Site Information, Catchments with their Treatments, Catchment Routings, Reports, Cost Analyses and Calculators. On the right, tabs for the selected item: Entry, Plots, Report and Help.
- Change: Routings are drawn by dragging catchment blocks on a routing diagram (in BMPFast the diagram is read-only and the routing is set in the Catchment Configuration window). Leaving a catchment out reconnects the catchments that drained to it.
- Change: Sizing, Discovery Plots and Cost are tabs on the treatment or routing they belong to; each treatment's efficiency curve is drawn on its Plots tab with your design marked.
- Change: Help on every field: click a field to read what it means, its unit and its range beside it; required fields are marked with a red *; a value that is refused is explained beside its box. Every item has a Help tab, and F1 opens the help for the screen you are on.
- Change: The catchments and treatments a routing uses are lightly shaded; Yes and No in the results are green and red; the Summary Report comes first.
- Change: A new project leads straight to a result: the first catchment makes Routing 1, and a catchment's first treatment is used in the routings where it had none (in BMPFast a catchment's BMP is chosen only in the routing window). You can set it back to No treatment.
- Change: The media mix library opens from a treatment's Media mix; the calculators are in the tree under Calculators.
Where BMPFast Plus's default method differs from BMPFast's, a project's numbers can differ; each version entry below marks these Results, and choosing BMPFast's method gives BMPFast's numbers.
BMPFast Plus — version 2.0.5 November 12, 2026 · submitted to the Microsoft Store
- New: The routing diagram draws a box round catchments in series that are calculated together as one system — retention basins, wet detention ponds, no treatment then retention or detention, and surface discharge filters with the equivalent treatment depth — labelled with the system and its method. The lines under the diagram list each system in words, and say why two basins in series are not one system when they are not.
- New: Right-click a box (or a block in it) to calculate its catchments as one system or as independent catchments; the choice is saved with the routing and can be undone, and the box stays, marked, either way.
- New: A report for each system, from the box's right-click or the routing's Report list: the result as one system, compared with independent catchments and, for reference, each treatment on its own catchment, with the calculation's own tables. See Dry retention basins in series for why the comparison matters.
BMPFast Plus — version 2.0.4 October 31, 2026 · on the Microsoft Store
- New: Help ▸ Check for a new version: asks the Microsoft Store and offers to install a newer one, asking first whether to save your project.
- New: Help ▸ About links to BMPFast Plus on the Microsoft Store, this site's BMPFast page, all of Dr. Ron Eaglin's programs, and the privacy policy.
- Change: A new project leads to a result: the first catchment makes Routing 1, and a catchment's first treatment is used where it had no treatment; a treatment no routing uses says so, and an unused Treatment used is shown in amber.
- Change: The Help menu: Help for this screen (F1), Help on the web, Check for a new version, About; tooltips on every menu item and button; every window and message title says BMPFast Plus.
- Change: Without a license, Save and New say why they cannot be used and offer the License manager; Add Treatment says to add or select a catchment first.
- Change: General Site Information and the Calculators group no longer show tabs that said "still to be built".
- Fix: The recovery copy of unsaved changes is never deleted without asking: opening a project by double-clicking it no longer discards it, and Cancel keeps it for the next start.
BMPFast Plus — version 2.0.3 October 29, 2026 · on the Microsoft Store
- New: BMPFast version 2 is named BMPFast Plus: the title bar, About, the License manager, dialogs and report footers. Your .bmpf files and folders are unchanged.
- New: On the Microsoft Store, free to install, with a license from bmpfast.com; its privacy policy.
- Change: Summary Report, as in BMPFast 1.1.10: under Pre vs. Post Removals the row before TN and TP says "Required", the question reads "Is removal (post<=pre) … met?", Maximum Removals is now "Specified Removals", and the section notes start "Note:". Wording only — no numbers change.
BMPFast Plus — version 2.0.2 October 21, 2026 · for reviewers and testers
- New: Baffle Box, a treatment type of its own: Appendix O, Table 1's removal for its generation (first or second), or with a media filter the media mix's removal.
- New: Hydrodynamic Separator, a treatment type of its own: Appendix O's 10 % phosphorus removal, no nitrogen.
- New: Catch Basin Insert, a treatment type of its own: you type the removal from the FSA–UF MS4 BMP Toolkit, and the yearly load reaching the inserts is shown in lb/yr to work it out.
- New: Add Report: a report you name and keep with the project — one of a routing's reports, made from the current values each time you open it. A Reports group in the tree lists these and every report saved with the project.
- New: The media mix library opens from a treatment's Media mix (Library…): the built-in mixes' values, and your own mixes to add, edit, delete and use.
- New: The notes from opening a BMPFast (.bmpt) project are written to a text file you can open now or later (File ▸ Notes from opening the v1 file…), instead of one long message.
- Change: The User Defined BMP's device list keeps only Alum Treating, Street Sweeping and Other; typing a baffle box, separator or catch basin name points to its type.
- Results: In a BMPFast (.bmpt) project, a User Defined BMP named Baffle Boxes, Baffle Boxes 2nd Gen, Hydrodynamic Separators or Catch Basin Inserts opens as that type. Baffle boxes and separators take Appendix O's removals and no hydraulic capture (no runoff volume removed); a catch basin insert keeps the removals it had. The notes say what changed.
- Fix: The User Defined device list had the baffle boxes' nitrogen and phosphorus removals the wrong way round.
- Help: The Comparison of Methods for Filter Media in Series page on the Help tabs of the Surface Discharge Filter, BMPs in Series and routings; help pages for the three new types written (to be published after review).
BMPFast Plus — version 2.0.1 October 20, 2026 · for reviewers and testers
- New: Filters in series: the Handbook equation (the default) or the equivalent treatment depth, on a BMPs in Series and on a routing.
- New: Retention basins in series on a routing: Treatment Depth Allocation (the default), efficiencies in series, or the Treatment Depths added (BMPFast's method).
- New: Wet Detention: the littoral zone is a credit of up to 10 percentage points that you enter, or BMPFast's method, which lowers the removal when there is no littoral zone, as a choice; in series the upstream pond keeps the credit.
- New: Vegetated Natural Buffer and Filter Strip: a credit for plants that you enter, in Retention and Detention; slopes up to 20 %, with a warning that above 6 % the tables are extrapolated.
- New: Loads not carried by runoff can be entered: they are added to the Equation 9-2 load, with their source and basis, on their own report line.
- New: The main window: a light shade on the catchments and treatments a routing uses, the Summary Report first, green Yes and red No, Add buttons on the left; 70 sample problems in the new version.
- Change: Values outside a method's tables are calculated with one warning, on the screen and the reports; the Summary Report is read-only.
- Results: New defaults, so a project's numbers can differ from 2.0.0 and from BMPFast in three places: retention basins routed in series (now Treatment Depth Allocation), wet ponds with or without a littoral zone (now the credit you enter), and the recovery-time credit (now optional, off by default). Set each back to BMPFast's method to get BMPFast's numbers.
- Results: Delay Time is not used: a BMPFast (.bmpt) project's Delay Time is dropped, with a note, so a retention-type treatment that had one removes less than BMPFast shows.
- Fix: A catchment added to a routing lost its runoff; a second treatment of one type in a BMPs in Series removed nothing; a swale is recalculated with the flow from upstream.
BMPFast Plus — version 2.0.0 October 18–19, 2026 · first build, for reviewers and testers; then called BMPFast 2
- New: One window: the project tree (General Site Information, Catchments with their Treatments, Catchment Routings, Cost Analyses, Calculators) and tabs for Entry, Plots, Report and Help.
- New: Opens BMPFast projects (.bmpt, never changed) and gives their numbers; saves its own projects (.bmpf); recent files and a recovery copy.
- New: Any number of treatments of one type on a catchment; BMPs in Series of up to four.
- New: Several routings, set up by drag and drop on a diagram, compared side by side.
- New: A choice of calculation method wherever there is more than one.
- New: Sizing and Discovery Plots on each treatment; every calculator; life-cycle cost analysis with the shared cost database.
- New: Reports on screen, printed, and saved as HTML, CSV and PDF; Undo for every change.
- New: The same license keys as BMPFast; without a license, projects open read-only (look, print, export).
- New: Help on every item, from the help pages; an installer for each user (no administrator rights).