SoftwarePlus.ai

All programs › BMPFast › BMPFast 2 sample problems

Service life of a B&G CTS24 filter

Example Problem 5: 2,175 sf of B&G CTS24, 24 in deep.

1The problem

The BMPFast sample project Example Problem 5: a surface discharge filter of 2,175 sf with 24 in of B&G CTS24 media, after the retention basin.

InputValueSource
Project (General Site Information)
Meteorological zoneFlorida Zone 5Zone map (help page 815)
Mean annual rainfall61 inMean annual rainfall map (help page 815)
Performance standard (analysis type)Specified Removal EfficiencyBMPFast sample project
Specified removal: TN / TP70 % / 80 %BMPFast sample project
Catchment 1: Highway Section 206 (Watershed Characteristics)
Land use, pre / postUndeveloped - Wet Flatwoods / HighwayBMPFast sample project
Area, pre / post6 / 6 acBMPFast sample project
Non-DCIA curve number, pre / post80 / 80BMPFast sample project
DCIA, pre / post0 / 60 %BMPFast sample project
EMC TN, pre / post1.213 / 1.250 mg/LBMPFast land use table (AH Vol I Table 9.2)
EMC TP, pre / post0.021 / 0.173 mg/LBMPFast land use table (AH Vol I Table 9.2)
Wet pond area (no loading)1.00 acBMPFast sample project

Find: how many years the filter media last before their phosphorus capacity is used up.

2Steps in BMPFast 2

  1. Start BMPFast 2, choose File ▸ Open and open service-life-cts24.bmpf (under Files below; it is the BMPFast sample project this problem starts from, saved by BMPFast 2). The tree on the left shows the project, its catchments and their treatments, its routing, and the Calculators. The project’s Entry tab (General Site Information) shows the zone, the rainfall and the type of analysis.

    General Site Information: the project’s Entry tab.
    General Site Information: the project’s Entry tab.
  2. In the tree open Calculators and select Media Filter Service Life. On its Entry tab keep What kind of treatment at Surface Discharge Filter: life against its surface area. Choose the Catchment Highway Section 206, the Upstream treatment Retention and the Filter media B&G CTS24. BMPFast 2 says what reaches the filter: “Removes nitrogen 62.1 %, phosphorus 62.1 %; captures 62.1 %, so 2.272 of 6.000 ac drains to the filter.”

    Media Filter Service Life: the filter and what feeds it.
    Media Filter Service Life: the filter and what feeds it.
  3. Type 2,175 in Filter surface area (BMPFast 2 suggested “405 sf, the area that meets the removal targets (nitrogen 70 %, phosphorus 80 %)”) and 24 in Media layer depth. Leave the orthophosphorus share at 1.00. The media’s values: Rate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 95 %.

    Media Filter Service Life: the surface area, the media and the target life.
    Media Filter Service Life: the surface area, the media and the target life.
  4. Results: Service life 38.7 years. 1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr. 4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus.

    Media Filter Service Life: the target life and the service life.
    Media Filter Service Life: the target life and the service life.
  5. At the bottom of the tab the chart plots the life against the surface area; the diamond is this design. Put the area and media into the filter would write them to the filter treatment; this problem only reads the life, so it is not pressed.

    Media Filter Service Life: the life against the surface area.
    Media Filter Service Life: the life against the surface area.
  6. The Calculations tab shows the equations with this problem’s values (v1’s Equations button). The values typed are saved with the project: File ▸ Save.

    Media Filter Service Life: the Calculations tab.
    Media Filter Service Life: the Calculations tab.

3Results

The calculator

On the screenValue
Upstream treatmentRetention
UpstreamRemoves nitrogen 62.1 %, phosphorus 62.1 %; captures 62.1 %, so 2.272 of 6.000 ac drains to the filter.
Filter mediaB&G CTS24
The media's valuesRate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 95 %
Filter surface area2,175 sf
Treatment depth2.641 in
Media layer depth24.00 in
Orthophosphorus share of the phosphorus1.00
Service life38.7 years
Phosphorus reaching and held by the filter1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr
Media volume and capacity4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus

The calculator’s report

Open this report on its own page · The Calculations tab.

BMPFast 2 and BMPFast (v1)

ResultBMPFast 2BMPFast (v1), its page
Nitrogen leaving the site4.314 kg/yr5.125 kg/yrdiffers
Phosphorus leaving the site0.226 kg/yr0.338 kg/yrdiffers
Site removal, nitrogen79.867 %76.081 %differs
Site removal, phosphorus92.374 %88.588 %differs
Highway Section 206: Multiple BMP removal, nitrogen79.867 %76.081 %differs
Highway Section 206: Multiple BMP removal, phosphorus92.374 %88.588 %differs

BMPFast 2 gives a different number for: Nitrogen leaving the site, Phosphorus leaving the site, Site removal, nitrogen, Site removal, phosphorus, Highway Section 206: Multiple BMP removal, nitrogen, Highway Section 206: Multiple BMP removal, phosphorus. See the notes below the table.

When BMPFast 2 opened the v1 file it said:

  • Highway Section 206, Wet Detention: BMPFast 2 takes the wet pond equations as a pond without a littoral zone, and adds a littoral zone credit of 10 percentage points (Appendix O's maximum) to this pond's removal, so it is higher than v1 shows; lower Littoral zone credit if your permit reviewer allows less. To calculate as v1, choose "Reduce without a littoral zone (v1)" in How the littoral zone counts (Design values) on the treatment's Entry tab.

4Check

Method.

Here: 4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus; 1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr. Dividing the capacity by the load on the media gives the life on the screen, 38.7 years. The Calculations tab lists each term with the media’s constants. A larger area gives more media, so a longer life, as the chart shows (help page 369, Media and Filtration Methodology).

5Files

6Help and methodology

Calculated with BMPFast 2 version 2.0.0 (2026-10-20), which opens the problem’s v1 project as it is. Screen captures are of BMPFast 2’s own window and are for demonstration only.