All programs › BMPFast › BMPFast 2 sample problems
Service life of a B&G CTS24 filter
Example Problem 5: 2,175 sf of B&G CTS24, 24 in deep.
Help: Media Filter Service Life (help page 369) · Download the .bmpf · Link to Solution in BMPFast Version 1
1The problem
The BMPFast sample project Example Problem 5: a surface discharge filter of 2,175 sf with 24 in of B&G CTS24 media, after the retention basin.
| Input | Value | Source |
|---|---|---|
| Project (General Site Information) | ||
| Meteorological zone | Florida Zone 5 | Zone map (help page 815) |
| Mean annual rainfall | 61 in | Mean annual rainfall map (help page 815) |
| Performance standard (analysis type) | Specified Removal Efficiency | BMPFast sample project |
| Specified removal: TN / TP | 70 % / 80 % | BMPFast sample project |
| Catchment 1: Highway Section 206 (Watershed Characteristics) | ||
| Land use, pre / post | Undeveloped - Wet Flatwoods / Highway | BMPFast sample project |
| Area, pre / post | 6 / 6 ac | BMPFast sample project |
| Non-DCIA curve number, pre / post | 80 / 80 | BMPFast sample project |
| DCIA, pre / post | 0 / 60 % | BMPFast sample project |
| EMC TN, pre / post | 1.213 / 1.250 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| EMC TP, pre / post | 0.021 / 0.173 mg/L | BMPFast land use table (AH Vol I Table 9.2) |
| Wet pond area (no loading) | 1.00 ac | BMPFast sample project |
Find: how many years the filter media last before their phosphorus capacity is used up.
2Steps in BMPFast 2
Start BMPFast 2, choose File ▸ Open and open
service-life-cts24.bmpf(under Files below; it is the BMPFast sample project this problem starts from, saved by BMPFast 2). The tree on the left shows the project, its catchments and their treatments, its routing, and the Calculators. The project’s Entry tab (General Site Information) shows the zone, the rainfall and the type of analysis.
General Site Information: the project’s Entry tab. In the tree open Calculators and select Media Filter Service Life. On its Entry tab keep What kind of treatment at Surface Discharge Filter: life against its surface area. Choose the Catchment Highway Section 206, the Upstream treatment Retention and the Filter media B&G CTS24. BMPFast 2 says what reaches the filter: “Removes nitrogen 62.1 %, phosphorus 62.1 %; captures 62.1 %, so 2.272 of 6.000 ac drains to the filter.”

Media Filter Service Life: the filter and what feeds it. Type 2,175 in Filter surface area (BMPFast 2 suggested “405 sf, the area that meets the removal targets (nitrogen 70 %, phosphorus 80 %)”) and 24 in Media layer depth. Leave the orthophosphorus share at 1.00. The media’s values: Rate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 95 %.

Media Filter Service Life: the surface area, the media and the target life. Results: Service life 38.7 years. 1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr. 4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus.

Media Filter Service Life: the target life and the service life. At the bottom of the tab the chart plots the life against the surface area; the diamond is this design. Put the area and media into the filter would write them to the filter treatment; this problem only reads the life, so it is not pressed.

Media Filter Service Life: the life against the surface area. The Calculations tab shows the equations with this problem’s values (v1’s Equations button). The values typed are saved with the project: File ▸ Save.

Media Filter Service Life: the Calculations tab.
3Results
The calculator
| On the screen | Value |
|---|---|
| Upstream treatment | Retention |
| Upstream | Removes nitrogen 62.1 %, phosphorus 62.1 %; captures 62.1 %, so 2.272 of 6.000 ac drains to the filter. |
| Filter media | B&G CTS24 |
| The media's values | Rate 0.052 gpm/sf, sorption 0.2 mg OP/g, saturated weight 95 lb/cf, phosphorus reduction 95 % |
| Filter surface area | 2,175 sf |
| Treatment depth | 2.641 in |
| Media layer depth | 24.00 in |
| Orthophosphorus share of the phosphorus | 1.00 |
| Service life | 38.7 years |
| Phosphorus reaching and held by the filter | 1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr |
| Media volume and capacity | 4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus |
The calculator’s report
Open this report on its own page · The Calculations tab.
BMPFast 2 and BMPFast (v1)
| Result | BMPFast 2 | BMPFast (v1), its page | |
|---|---|---|---|
| Nitrogen leaving the site | 4.314 kg/yr | 5.125 kg/yr | differs |
| Phosphorus leaving the site | 0.226 kg/yr | 0.338 kg/yr | differs |
| Site removal, nitrogen | 79.867 % | 76.081 % | differs |
| Site removal, phosphorus | 92.374 % | 88.588 % | differs |
| Highway Section 206: Multiple BMP removal, nitrogen | 79.867 % | 76.081 % | differs |
| Highway Section 206: Multiple BMP removal, phosphorus | 92.374 % | 88.588 % | differs |
BMPFast 2 gives a different number for: Nitrogen leaving the site, Phosphorus leaving the site, Site removal, nitrogen, Site removal, phosphorus, Highway Section 206: Multiple BMP removal, nitrogen, Highway Section 206: Multiple BMP removal, phosphorus. See the notes below the table.
When BMPFast 2 opened the v1 file it said:
- Highway Section 206, Wet Detention: BMPFast 2 takes the wet pond equations as a pond without a littoral zone, and adds a littoral zone credit of 10 percentage points (Appendix O's maximum) to this pond's removal, so it is higher than v1 shows; lower Littoral zone credit if your permit reviewer allows less. To calculate as v1, choose "Reduce without a littoral zone (v1)" in How the littoral zone counts (Design values) on the treatment's Entry tab.
4Check
Method.
| Service life (years) | = the orthophosphorus the media can hold ÷ the orthophosphorus it holds back each year. |
Here: 4,350 cf (2,175 sf × 24 in / 12); it holds 37.52 kg of orthophosphorus; 1.123 kg/yr reaches the filter; it holds back 0.968 kg/yr (its phosphorus removal 86.3 %); orthophosphorus load on the media 0.968 kg/yr. Dividing the capacity by the load on the media gives the life on the screen, 38.7 years. The Calculations tab lists each term with the media’s constants. A larger area gives more media, so a longer life, as the chart shows (help page 369, Media and Filtration Methodology).
5Files
- service-life-cts24.bmpf: the project, saved by BMPFast 2. Save it (your browser puts it in Downloads), then in BMPFast 2 choose File ▸ Open and open it. Opened again and calculated, it gives the numbers on this page.
- service-life-cts24.bmpt: the same project as BMPFast (v1) saved it. BMPFast 2 opens it too (File ▸ Open); saving it then makes a .bmpf and leaves the .bmpt as it was.
- Routing 1 (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Routing 1 — Summary Report (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- BMPs in Series (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- BMPs in Series — calculations (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Media Filter Service Life (BMPFast 2’s report, as Open in browser on its Report tab gives it)
- Media Filter Service Life — calculations (BMPFast 2’s report, as Open in browser on its Report tab gives it)
6Help and methodology
Calculated with BMPFast 2 version 2.0.0 (2026-10-20), which opens the problem’s v1 project as it is. Screen captures are of BMPFast 2’s own window and are for demonstration only.