TrafficLab+ Help
Messages and what to do
TrafficLab+ says what went wrong in plain words, and usually what to do. These are the messages you are most likely to see.
Studies and files
| Message | What to do |
| Give the study a title — it is the heading of the page. | Type a title in the New study window. |
| Type the budget in millions of dollars, from 0.1 to 1000 — for example 5, or $3.5M. | The budget is in millions: type 5 for $5 million. |
| This file is not a TrafficLab+ study: … | The file is damaged or another kind of file. Ask for the .trafficlab file again. |
| This study was made by a newer TrafficLab+ (format …). Update TrafficLab+ to open it. | Update TrafficLab+ from the Microsoft Store. |
| The study could not be saved. Nothing was lost: it is still open here. | Try Save as… and another folder, such as Documents. |
| That file is gone; it has been taken off the list. | The study was moved or deleted since you last opened it. Use Open a study file… to find it where it is now. |
| Something went wrong in TrafficLab+. If a study is open, save it under a new name (File ▸ Save as…), then close TrafficLab+ and open it again. | Do that: the copy under a new name keeps your work. If it happens again, send Dr. Ron Eaglin what you were doing and the line after "Details for support:". |
A message that ends with Details for support: gives the plain words first; the text after it is for whoever helps you, and you can leave it.
The yellow bar: the page cannot run
The page cannot run until these are fixed; click a line in the bar to go to the thing to fix.
| Message | What to do |
| The road end "…" must have exactly one road; it has 0. | Join it to the network with Add road, or Remove it. |
| "…" has 5 roads. TrafficLab+ handles intersections with 3 or 4 roads; leave a road out of the study, or split the intersection in two. | Remove a road, or add a second intersection. |
| A study needs at least two road ends, where traffic comes in and goes out. | Add road end, then Add road. |
| The signal at "…" needs a cycle between 40 and 180 seconds. | Change Cycle length in Network. |
| Type how many vehicles per hour enter at "…" (0 if none). | Fill in that road end's traffic in Traffic. |
A published page with such a problem shows This traffic study cannot run and the reason: open the study in TrafficLab+, correct it, and
publish again.
The Map and OpenStreetMap
| Message | What to do |
| Zoom in to load: the map shows … km across, and roads are loaded for less than 4 km. | Zoom in until the area is smaller. |
| Nothing found. Try a street and a town… | Search for one street and the town, or a town alone, then drag the map. Crossings by two street names are not found. |
| No intersections in this area: move or zoom out a little and load again. | Move or widen the map a little. |
| Ten is the most TrafficLab+ studies at once… | Remove one chosen intersection to choose another. |
| OpenStreetMap's road service is busy right now. / OpenStreetMap asked TrafficLab+ to slow down. | Wait a minute and press Load the roads again. |
| TrafficLab+ could not get the roads from OpenStreetMap. Check the internet connection… | Check the connection and try again. |
| The map cannot be shown on this computer … Microsoft's WebView2, part of Edge, is needed for it. | Install or repair Microsoft Edge WebView2 from Microsoft. |
FDOT counts
| Message | What to do |
| Counts are found by where the roads are on the map, and this study was not made from the map (1 Map). | Type the volumes (Vehicles per hour typed for each road end), or make the study from the map. |
| FDOT's counts cover Florida only, and this study is elsewhere. | Type counts from your city or state, or ask the AI to estimate them. |
| FDOT has no counts on these roads. | Type the volumes yourself. |
| FDOT's count service is busy. / TrafficLab+ could not reach FDOT's count service. | Wait a minute, check the connection, and press the Look up button again. |
The AI
| Message | What to do |
| No AI is set up yet. | Press Set up an AI now…, or Settings ▸ AI settings…, and paste a key. See The AI. |
| Type what you know or want first — the AI works from your words. | Type something in the box, then Ask the AI. |
| …it proposed nothing TrafficLab+ can use | Ask again, with more detail. |
| The AI declined this request. | Say it another way, or choose another provider. A refusal costs nothing. |
| TrafficLab+ could not reach the AI service. / The AI took too long… | Check the connection and try again. |
| There is no traffic test to talk about yet… | Press Run traffic test on the page, wait for it to finish, then ask the coach again. |
Publishing
| Message | What to do |
| No study is ticked to publish. | Tick at least one under 1 Your studies. |
| GitHub could not be reached… Nothing was changed on your website. | Check the connection and press Publish again. |
| GitHub did not accept the token … it has probably expired or been deleted. | Make a new token and paste it with GitHub token… (steps). |
| The token is not allowed to … | The token is missing a permission: Administration, Contents and Pages must each be Read and write. Make a new one. |
| GitHub's rate limit has been reached | Wait a few minutes and try again. |
| … already holds something that TrafficLab+ did not put there — perhaps your own work. | Press No and type another name under Repository, unless you really want it replaced. |
| Git is not installed, or not on the PATH. | Save a GitHub token (simplest), or install Git for Windows. |
| The files are on GitHub. One thing left, and only once — turn the website on | Follow the numbered steps it shows (Settings → Pages → Deploy from a branch, main, / (root), Save), or save a token so TrafficLab+ does it next time. |
| The address shows "404" | The first publish takes GitHub a minute or two. Wait, then reload. |
Something not covered here? Write to ron.eaglin@gmail.com with the message's words.