SoftwarePlus.ai

SMADA Help

The calculators, one by one

Everything in SMADA's left rail, in the order the rail shows it. Each link goes to that item's own page: what it is for, a picture of each of its tabs, and every equation SMADA uses with its source. Not sure which you need? Start from the question you are asking — each line says what it answers.

Items you add to the project

Under ADD TO THE PROJECT. These hold your data; the Hydrograph tool and the Statistics calculators read them. Data sets have no page of their own: see data sets.

  • Watershed — the land that drains to one outlet: its area, how much is paved, its time of concentration, and how rain soaks in.
  • Rainfall — a design storm: the depth of rain in each step of time, typed in or built from a published storm shape.

Project tools

Under PROJECT TOOLS.

  • Hydrograph — how much water leaves a watershed, and when, in a given storm: the runoff hydrograph, its peak discharge, time to peak and runoff volume.

Runoff and timing

Under CALCULATORS, at the top level of the rail.

  • SCS runoff — how many inches of a storm run off, from the storm's depth and a curve number.
  • Curve number — one curve number for a mixed area, built from its land covers, soil groups and areas (TR-55 tables).
  • Time of concentration — how long water takes to cross a watershed, by seven formulas side by side, so you can compare them and pick one.
  • Horton infiltration — how fast a soil takes in water at a given time into a storm, and how much it has taken in.
  • Rational method — the peak flow from a small area, Q = C i A.
  • Runoff coefficient — one runoff coefficient C for a mixed area, built from its covers and soils.

Flow

Click Flow in the rail to open the group.

  • Pipe flow — how deep and fast water runs in a pipe, box culvert or channel on a slope, how much it can carry, and a storm-sewer design check.
  • Pressure pipe — a pipe flowing full: enter any three of diameter, flow, velocity, friction coefficient and friction slope and the others are found, with the head lost over a length.
  • Energy equation — Bernoulli's equation between two points on a pipe: leave one elevation, pressure, velocity or head loss blank and it is found.
  • Open channel — an open channel of any of seven shapes, or a surveyed section: leave one of flow, depth, slope or Manning's n blank and it is found.
  • Weir — flow over a sharp-crested, broad-crested, V-notch or Cipolletti weir: leave one of flow, head, crest length or coefficient blank and it is found.

Statistics

Click Statistics in the rail to open the group.

  • Data series — the mean, standard deviation and skew of a record, such as the largest rainfall of each year, and the Gumbel estimate for a chosen return period.
  • Distributions — fits a record of extremes to seven frequency distributions, shows which fits best, and gives the 2- to 200-year values.
  • Regression — fits x, y pairs to seven models and picks the one that predicts y best, ruling out models that fail a check.

Inside SMADA, the Instructions tab (F1) gives the same depth for whichever of these is selected, with a worked example, and Help ▸ Help on the web (or the Help on the web button above the Instructions tab) opens that item's page here.

← Working with calculators Reports and plots →