SoftwarePlus.ai

All programs › Assessment+ › Help › Faculty: a course's assessment

1. Establish outcomes and measures

Before a semester can be recorded the course needs its course outcomes, the program they count toward, and a measure for each — the graded work that shows whether students met it.

All help pages ↓

1. Find or start your course

  1. In the tree, click 📚 Courses. Every course in the department folder is listed.
  2. If your course is listed, double-click it to open it in the course editor. If its Course File column says — none yet —, select it: the first button becomes ➕ Start Evaluations, and the new record starts with the code and title filled in.
  3. If it is not listed, click ➕ New Course Evaluation, type the Course code (for example EGN3214) and the Course title, and click Continue. The code is what everything is filed under, so type it exactly as the catalog does.
  4. Have the course's evaluations in an older Excel workbook? Click 📥 Import from Excel… instead — see Importing Excel evaluation workbooks. Have its .ciafce file somewhere else? 📂 Open a File….

Screens: Courses and a course, The course editor.

Done when: the course editor is open on your course.

2. Write the course outcomes

Course outcomes belong to the course, not to one semester, so they are written once.

  1. From the syllabus (uses AI): on the course's screen (📚 Courses ▸ the course), click 📄 Fill In from a Syllabus…, choose the syllabus file or link, click Read the Document, tick the changes you want, and click Apply the Selected Changes. You see every change first; nothing is deleted and no outcome is renumbered.
  2. By hand: in the course editor, on the Course Outcomes tab, click + Add Outcome and type the statement. Repeat for each outcome.
  3. Set Level if your program tracks it: Introduced, Developed or Mastered.
  4. Click 💾 Save.

Outcomes are numbered CO1, CO2 … and a number is never reused, because every semester's measures point at an outcome by its number. To retire an outcome, untick Active; its history stays. If an outcome's meaning changes, retire it and add a new one rather than rewording it, since rewording changes it for every past semester too.

Want ideas? 📊 Reports ▸ Recommended Course Outcomes reads a course export and proposes 4 to 8 measurable outcomes; it changes nothing by itself. Outcome reports. Screen: Course outcomes and mapping.

Done when: every outcome the course assesses is on the Course Outcomes tab, and saved.

3. Choose the program and its outcomes

A course counts toward a program's results only under the programs it is assessed under. A course that serves two programs is assessed under both — it is measured once, and only its mapping differs.

  1. In the course editor's header, click the 🎓 button (it reads Map Program… until the course has a program), or 🎓 Programs… on the Course Outcomes tab. The Program Mappings window opens.
  2. Click Add Program…, pick the program from the list of programs defined on this computer, and click Add. Pick from the list rather than typing a new name: a mistyped name is a separate program, and is not counted in the coordinator's reports. If your program is not in the list, you are probably not in your department's folder (File ▸ Open Department Folder). If you work on your own computer, ask your coordinator for the program's exact title (for example BSIT), type it exactly, and confirm.
  3. Close the window. A PO column for the program (its program outcomes) appears on the Course Outcomes tab.
  4. If the Add box said the program comes with its program outcomes, they are already in: skip this step. Otherwise click 📋 Program Outcomes… in the header. If the coordinator has entered the program's outcomes in this department folder, click ⬇ From Program Assessment — that is the official list (Program Assessment is the coordinator's side of Assessment+). Otherwise import them from a catalog page (⬇ Import URL) or a document (⬇ Import Doc), or type them with + Add PO.
  5. Click Save, then 💾 Save in the editor.

Screens: Program Mappings, Program Outcomes.

Done when: the course's program is listed, with its program outcomes on file.

4. Map each course outcome to a program outcome

The mapping is how the course's results reach the program: a course outcome that is not mapped adds nothing to the program's reports.

  1. On the Course Outcomes tab, click 🔗 Map Course Outcomes to Program Outcomes… (or, on the course's screen under 📚 Courses, 🎓 Map Outcomes to a Program…).
  2. Check the Program at the top.
  3. For each course outcome on the left, choose the program outcome it supports in the Mapped PO column, or leave it unmapped.
  4. Read the list on the right: each program outcome shows the course outcomes mapped to it, and highlighted rows have none.
  5. Optional: click ⚡ Analyze Mapping (AI) for an Outcome Alignment Review — a second opinion on the mapping as it stands. It is kept under the course's 📊 Reports.
  6. Click Save, then 💾 Save in the course editor.

Not sure which outcome supports which? 📊 Reports ▸ Recommended Outcome Alignment proposes the whole mapping, with a reason and a confidence for each pair. Screens: Map Course Outcomes to Program Outcomes, a course's screen.

Done when: the course's screen (📚 Courses ▸ the course) shows every active outcome mapped for each program.

5. Decide how each outcome will be measured

  1. For each course outcome, choose the graded work that shows whether a student met it — an exam question, a lab, a project — and the threshold: the score a student must reach to count as meeting it (Assessment+ starts at 70%).
  2. Decide the measure target: the share of students you expect to reach the threshold. Example: threshold 70%, target 80% — the measure is met when at least 80% of the students score 70% or more. If you set no target, the threshold is used as the target.
  3. If an outcome has several measures, decide which one is primary (★): the one the program counts.
  4. Optional, to choose well: make a course export (below), then on the course's 📊 Reports choose Course Outcome Measurement Assessment ▸ ⚡ Make a New Report…. It judges every graded item as a measure of each outcome, suggests a threshold and a primary measure, and names any outcome nothing measures. It reads no student results; adding the gradebook export lets it match each item to its column.
  5. The measures themselves are entered with the first semester you record — typed on the Outcome Measures tab, or set up in Import Grade Roster, which can take them straight from this assessment. After that, each new semester can start from the previous one's measures. See Collect measures.
  6. Attach the instrument itself — the blank assignment, quiz or rubric — with 📎 in the Doc column of the Outcome Measures tab, so it can be shown to a reviewer later.

A course export is the whole course packaged as one .imscc file. In Brightspace: open the course, Course Admin ▸ Import / Export / Copy Components ▸ Export as Common Cartridge, tick Select All Components and Include course files, and download the file when it is ready. In Canvas: Settings ▸ Export Course Content ▸ Course ▸ Create Export, then download it.

Screens: Course Outcome Measurement Assessment, Grades and outcome measures.

Done when: you know, for every active outcome, its measure, threshold and target.

Next: 2. Collect measures — record a semester.